EXTREME-SYSTEM-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY FROM SNMPv2-SMI
		OBJECT-TYPE     FROM SNMPv2-SMI
                Unsigned32	FROM SNMPv2-SMI
                TruthValue      FROM SNMPv2-TC
		DisplayString   FROM RFC1213-MIB
                extremeAgent   FROM EXTREME-BASE-MIB
		PortList	FROM EXTREME-BASE-MIB
                IpAddress       FROM SNMPv2-SMI;

        extremeSystem MODULE-IDENTITY
                LAST-UPDATED "0007240000Z"
                ORGANIZATION "Extreme Networks, Inc."
                CONTACT-INFO "www.extremenetworks.com"
                DESCRIPTION "Extreme System objects: objects common to all platforms"
        ::= { extremeAgent 1 }

        extremeSystemCommon OBJECT IDENTIFIER
        ::= { extremeSystem 1 }

--
--  System group
--
--  Objects common to all platforms
--
--  Configuration save objects.  These objects are used by the network
--  management application to save configuration changes into the
--  persistant store.  There are 2 stores on the device; a primary and
--  a secondary.

        extremeSaveConfiguration OBJECT-TYPE
               	SYNTAX INTEGER {
                    	saveToPrimary(1),
                        saveToSecondary(2)
        	}
                MAX-ACCESS read-write
                STATUS current
                DESCRIPTION
            	"When this object is set, the device will copy the contents
		of the configuration database to a buffer and save it to the 
		persistant store specified by the value of the object.  The 
		save is	performed asynchronously, and the snmp agent will
                continue to respond to both gets and sets while the save is
                taking place.  A network management application may use the
		extremeSaveStatus object to determine when the asynchronous
		save operation has completed."
	::= { extremeSystemCommon 3 }

	extremeSaveStatus OBJECT-TYPE
               	SYNTAX INTEGER { saveInProgress(1), saveNotInProgress(2) }
                MAX-ACCESS	read-only
                STATUS current
                DESCRIPTION
           	"This object will return the status of a save operation invoked
		by setting the extremeSaveConfiguration object.  A network
		management application can read this object to determine that a
		save operation has completed."
	::= { extremeSystemCommon 4 }                

        extremeCurrentConfigInUse OBJECT-TYPE
                SYNTAX INTEGER { primary(1), secondary(2) }
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Shows which NVRAM configuration store was used at last boot"
	::= { extremeSystemCommon 5 }                

        extremeConfigToUseOnReboot OBJECT-TYPE
                SYNTAX INTEGER { primary(1), secondary(2) }
        	MAX-ACCESS read-write
                STATUS current
                DESCRIPTION
        	"Controls which NVRAM configuration store will be used 
                on next reboot."
	::= { extremeSystemCommon 6 }               
 
        extremeOverTemperatureAlarm OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Alarm status of overtemperature sensor in device 
                enclosure."
	::= { extremeSystemCommon 7 }

        extremeCurrentTemperature OBJECT-TYPE
                SYNTAX INTEGER (0..100)
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Current temperature in degrees celcius measured inside
                device enclosure."
	::= { extremeSystemCommon 8 }

--
-- Table of operational status of all internal Fans
--
        extremeFanStatusTable OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremeFanStatusEntry
		MAX-ACCESS  not-accessible
		STATUS current
                DESCRIPTION
                "Table of operational status of all internal cooling fans."
	::= { extremeSystemCommon 9 }

        extremeFanStatusEntry OBJECT-TYPE
		SYNTAX  ExtremeFanStatusEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
                "Entry in table of all internal cooling fans."
		INDEX { extremeFanNumber }
	::= { extremeFanStatusTable 1 }

	ExtremeFanStatusEntry ::=
		SEQUENCE {
			extremeFanNumber
				INTEGER,
			extremeFanOperational
				TruthValue,
		        extremeFanEntPhysicalIndex 
				INTEGER
		}

        extremeFanNumber OBJECT-TYPE
                SYNTAX INTEGER
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Identifier of cooling fan, numbered from the front and/or 
                left side of device."
	::= { extremeFanStatusEntry 1 }

        extremeFanOperational OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Operational status of a cooling fan."
	::= { extremeFanStatusEntry 2 }

        extremeFanEntPhysicalIndex OBJECT-TYPE
                SYNTAX INTEGER
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "The entity index for this fan entity in the entity table."
	::= { extremeFanStatusEntry 3 }

        extremePrimaryPowerOperational OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Operational status of internal power supply of a device."
	::= { extremeSystemCommon 10 }

        extremeRedundantPowerStatus OBJECT-TYPE
                SYNTAX INTEGER { notPresent(1), presentOK(2), presentNotOK(3) }
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Operational status of an external redundant power supply to a device."
	::= { extremeSystemCommon 11 }

        extremeRedundantPowerAlarm OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Alarm state of an external redundant power supply to a device. 
                Alarm state indicates either fan failure or overtemperature 
                condition."
	::= { extremeSystemCommon 12 }

        extremePrimarySoftwareRev  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..15))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The software revision of the primary image stored in 
                this device.  This string will have a zero length if 
                the revision is unknown, invalid or not present. This
                will also be reported in RMON2 probeSoftwareRev if this
                is the software image currently running in the device."
	::= { extremeSystemCommon 13 }

        extremeSecondarySoftwareRev  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..15))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The software revision of the secondary image stored in 
                this device.  This string will have a zero length if 
                the revision is unknown, invalid or not present. This
                will also be reported in RMON2 probeSoftwareRev if this
                is the software image currently running in the device."
	::= { extremeSystemCommon 14 }

        extremeImageToUseOnReboot OBJECT-TYPE
                SYNTAX INTEGER { primary(1), secondary(2) }
        	MAX-ACCESS read-write
                STATUS current
                DESCRIPTION
        	"Controls which image will be used 
                on next reboot."
	::= { extremeSystemCommon 15 }               

        extremeSystemID  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..126))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This represents the System ID of the Summit Switch."
	::= { extremeSystemCommon 16 }

        extremeSystemBoardID  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..126))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This represents the Board ID of the Summit Switch."
	::= { extremeSystemCommon 17 }

        extremeSystemLeftBoardID  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..126))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This represents the Left Board ID of the Summit Switch."
	::= { extremeSystemCommon 18 }

        extremeSystemRightBoardID  OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..126))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "This represents the Right Board ID of the Summit Switch."
	::= { extremeSystemCommon 19 }

	-- Add variables to report power supply data
	extremeInputPowerVoltage OBJECT-TYPE
		SYNTAX  INTEGER {
			v110 (1),
			v220 (2),
			v48DC (3)
		}	
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The input power voltage at which the system is currently operating."
	::= { extremeSystemCommon 20 }

        extremePowerStatus OBJECT-TYPE
                SYNTAX INTEGER { notPresent(1), presentOK(2), presentNotOK(3) }
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Operational status of the power supply to a device."
	::= { extremeSystemCommon 21 }

        extremePowerAlarm OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                "Alarm state of the power supply to a device. 
                Alarm state indicates either fan failure or overtemperature 
                condition."
	::= { extremeSystemCommon 22 }

        extremeRmonEnable OBJECT-TYPE
                SYNTAX TruthValue
        	MAX-ACCESS read-write
                STATUS current
                DESCRIPTION
                      "Setting this to true will cause the agent to 
		       start collecting RMON statistics."
	::= { extremeSystemCommon 23 }

-- OID extremeSystemCommon.24 has been deprecated and extremeCpuTasktable
-- has been moved to extremeSystemCommon.29 with new name extremeCpuTask2table

   extremeBootROMVersion OBJECT-TYPE
		SYNTAX DisplayString (SIZE(0..15))	
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
		  "The software revision of the bootrom on the device. 
                   This string will have a zero length if the revision is 
                   unknown or invalid."
		       
	::= { extremeSystemCommon 25 }

   extremeDot1dTpFdbTableEnable OBJECT-TYPE
		SYNTAX TruthValue
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
		 "Setting this to true will cause GetNext operations on 			  the dot1dTpFdbTable to be allowed. Note that Get operations 			  are always allowed."

	::= { extremeSystemCommon 26 }

        extremePowerSupplyTable OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremePowerSupplyEntry
		MAX-ACCESS  not-accessible
		STATUS current
                DESCRIPTION
                "Table of status of all power supplies in the system."
	::= { extremeSystemCommon 27 }

        extremePowerSupplyEntry OBJECT-TYPE
		SYNTAX  ExtremePowerSupplyEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
                "An entry indicating the status of a specific power supply."
		INDEX { extremePowerSupplyNumber }
	::= { extremePowerSupplyTable 1 }

	ExtremePowerSupplyEntry ::=
		SEQUENCE {
			extremePowerSupplyNumber
				INTEGER,
			extremePowerSupplyStatus
				INTEGER,
                        extremePowerSupplyInputVoltage
				INTEGER,
                        extremePowerSupplySerialNumber
                                DisplayString,
		        extremePowerSupplyEntPhysicalIndex 
				INTEGER
		}

        extremePowerSupplyNumber OBJECT-TYPE
                SYNTAX INTEGER
        	MAX-ACCESS accessible-for-notify
                STATUS current
                DESCRIPTION
                	"Power supply number."
	::= { extremePowerSupplyEntry 1 }

        extremePowerSupplyStatus OBJECT-TYPE
                SYNTAX INTEGER { notPresent(1), presentOK(2), presentNotOK(3) }
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                	"Status of the power supply."
	::= { extremePowerSupplyEntry 2 }

	extremePowerSupplyInputVoltage OBJECT-TYPE
		SYNTAX INTEGER { v110 (1), v220 (2), v48DC (3), unknown(4) }
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Input voltage of the power supply"
	::= { extremePowerSupplyEntry 3 }

        extremePowerSupplySerialNumber OBJECT-TYPE
                SYNTAX DisplayString (SIZE(0..126))
                MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                        " The serial number of the power supply unit."
         ::= { extremePowerSupplyEntry 4 }

        extremePowerSupplyEntPhysicalIndex OBJECT-TYPE
                SYNTAX INTEGER
                MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                        " The entity index for this psu entity in the entity
                table."
         ::= { extremePowerSupplyEntry 5 }

     extremeCpuAggregateUtilization OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                  "The aggregate CPU utilization since
		   the time the start started executing."
	::= { extremeSystemCommon 28 }

--
-- The CPU Task table lists all executing tasks 
--
        extremeCpuTask2Table OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremeCpuTask2Entry
		MAX-ACCESS  not-accessible
		STATUS current
                DESCRIPTION
                  "Table of CPU tasks that are active."
	::= { extremeSystemCommon 29 }

        extremeCpuTask2Entry OBJECT-TYPE
		SYNTAX  ExtremeCpuTask2Entry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
                  "An entry in table of describes a single task."
        INDEX { extremeCpuTask2CpuId, extremeCpuTask2Name }
	::= { extremeCpuTask2Table 1 }

	ExtremeCpuTask2Entry ::=
		SEQUENCE {
			extremeCpuTask2CpuId
				Unsigned32,
			extremeCpuTask2Name
				DisplayString,
           	extremeCpuTask2Id
				Unsigned32,
			extremeCpuTask2Pc
				Unsigned32,
			extremeCpuTask2Status
				DisplayString,
			extremeCpuTask2Utilization
				Unsigned32,
			extremeCpuTask2MaxUtilization
				Unsigned32
		}

	  extremeCpuTask2CpuId OBJECT-TYPE
            SYNTAX Unsigned32
        	MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                  "CPU on which this task last executed or is executing.
                   The primary CPU has a value of 1."
	::= { extremeCpuTask2Entry 1 }

        extremeCpuTask2Name OBJECT-TYPE
            SYNTAX DisplayString (SIZE(0..31))
        	MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                  "Name associated with the reported task id."
	::= { extremeCpuTask2Entry 2 }

    
        extremeCpuTask2Id OBJECT-TYPE
                SYNTAX Unsigned32
        	MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
                  "Task identifier assigned by the operating system when
                   this task is spawned."
	::= { extremeCpuTask2Entry 3 }

        extremeCpuTask2Pc OBJECT-TYPE
            SYNTAX Unsigned32
        	MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                  "The value of the program counter for this task.
		   It indicates the address of the next instruction
                   that would be executed once the operating system
 		   resumes this task." 
	::= { extremeCpuTask2Entry 4 }

        extremeCpuTask2Status OBJECT-TYPE
            SYNTAX DisplayString
        	MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                  "The current status of the task as reported by the
	  	   operating system."
	::= { extremeCpuTask2Entry 5 }

        extremeCpuTask2Utilization OBJECT-TYPE
            SYNTAX Unsigned32
        	MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                  "The current CPU utilization by this task. This
		   is the utilization when the task last executed."
	::= { extremeCpuTask2Entry 6 }

        extremeCpuTask2MaxUtilization OBJECT-TYPE
            SYNTAX Unsigned32
        	MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                  "The maximum CPU utilization by this task since
		   the time the start started executing. This value
		   may be cleared."
	::= { extremeCpuTask2Entry 7 }

        extremeAuthFailSrcAddr  OBJECT-TYPE
            SYNTAX IpAddress
            MAX-ACCESS  accessible-for-notify
            STATUS current
            DESCRIPTION
                "The IP address of the originator of the bad SNMP 
                request that caused the generation of an authentication 
                failure trap."
        ::= { extremeSystemCommon 30 }

        extremeCpuTransmitPriority      OBJECT-TYPE
            SYNTAX INTEGER {
                   normal(1),
                   high(2)
                   }
            MAX-ACCESS                  read-write
            STATUS                      deprecated
            DESCRIPTION
                "The CPU transmit priority."
         ::= { extremeSystemCommon 31 }

        extremeImageBooted OBJECT-TYPE
                SYNTAX INTEGER { primary(1), secondary(2) }
        	  MAX-ACCESS read-only
                STATUS current
                DESCRIPTION
        	"The image with which the switch was last booted, using which it is currently running."
	::= { extremeSystemCommon 32 }               
        
        extremeMsmFailoverCause OBJECT-TYPE
            SYNTAX INTEGER { never(1),
                             admin(2),
                             exception(3), 
                             removal(4),
                             hwFailure(5), 
                             watchdog(6),
                             keepalive(7) 
                           }
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
        "The cause of the last MSM failover. never(1) means an
                MSM Failover has not occurred since the last reboot. 
                admin(2) means the failover was initiated by the user. 
                exception(3) means the former master MSM encountered a 
                software exception condition. removal(4) means the master 
                MSM was physically removed from the chassis. hwFailure(5) 
                means a diagnostic failure was detected in the master MSM. 
                watchdog(6) means that the master MSM hardware watchdog 
                timer expired. keepalive(7) means the master MSM failed to 
                respond to slave keepalive requests. The MSM failover will 
                have been hitless only in the admin(2) and exception(3) 
                cases "
        ::= { extremeSystemCommon 33 }


extremeImageTable OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremeImageEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table containing information about each software image."
        ::= { extremeSystemCommon 34 }

	extremeImageEntry OBJECT-TYPE
		SYNTAX  ExtremeImageEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table entry containing information about each software image."
		INDEX	  { extremeImageNumber }
			::= { extremeImageTable 1 }

	ExtremeImageEntry ::= SEQUENCE {
		extremeImageNumber 		INTEGER,
                extremeMajorVersion             INTEGER,
                extremeSubMajorVersion          INTEGER,
                extremeMinorVersion             INTEGER,
                extremeBuildNumber              INTEGER,
                extremeTechnologyReleaseNumber  INTEGER,
                extremeSustainingReleaseNumber  INTEGER,
                extremeBranchRevisionNumber     INTEGER,
                extremeImageType                INTEGER,
                extremeImageDescription         DisplayString,
                extremeImageSecurity            INTEGER,
                extremePatchVersion             INTEGER
	}

	extremeImageNumber OBJECT-TYPE
		SYNTAX  INTEGER {
                       cur(0),
                       pri(1),
                       sec(2)
                }
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"A unique integer identifying the particular software
                image."
		::= { extremeImageEntry 1 }

	extremeMajorVersion   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The ExtremeWare Release Major Version."
		::= { extremeImageEntry 2 }

        extremeSubMajorVersion   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS deprecated
		DESCRIPTION
		"The ExtremeWare Release Sub-major Version. This object is
                 deprecated from extremeware 7.3. The extremeMinorVersion
                 gets the value of extremeSubMajorVersion and the new
                 extremePatchVersion gets the value of old extremeMinorVersion
                 value."
		::= { extremeImageEntry 3 }
                
        extremeMinorVersion   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The ExtremeWare Release Minor Version."
		::= { extremeImageEntry 4 }
                
        extremeBuildNumber   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The ExtremeWare Build Number."
		::= { extremeImageEntry 5 }
                
        extremeTechnologyReleaseNumber   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The Technology Release version. This value is zero for
                all but TR releases."
		::= { extremeImageEntry 6 }
                
        extremeSustainingReleaseNumber   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The Sustaining Release number for the ExtremeWare version."
		::= { extremeImageEntry 7 }
                
        extremeBranchRevisionNumber   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The incremental build on specified branch."
		::= { extremeImageEntry 8 }
                
        extremeImageType   OBJECT-TYPE
		SYNTAX  INTEGER {
                       trunk(0),
                       branch(1),
                       patch(2),
                       technology(3),
                       beta(4)
                      }
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The branch type from which the image was built."
		::= { extremeImageEntry 9 }
                
        extremeImageDescription   OBJECT-TYPE
		SYNTAX  DisplayString (SIZE(0..13))
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
		"A unique string that can be used to identify the specific patch,
                technology, or development branch release."
		::= { extremeImageEntry 10 }
                
        extremeImageSecurity   OBJECT-TYPE
		SYNTAX  INTEGER {
                       unknown(0),
                       nossh(1),
                       ssh(2)
                      }
		MAX-ACCESS  read-only
		STATUS deprecated
		DESCRIPTION
		"Indicates whether image was built with ssh.This object
                 is deprecated, the ssh capability can be obtained from
                 the extremeImageSshCapability of the ImageFeatureTable"
		::= { extremeImageEntry 11 }
               
        extremePatchVersion   OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The ExtremeWare Release Patch Version."
		::= { extremeImageEntry 12 }
                
extremeImageFeatureTable OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremeImageFeatureEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table containing information about the software features."
        ::= { extremeSystemCommon 35 }

	extremeImageFeatureEntry OBJECT-TYPE
		SYNTAX  ExtremeImageFeatureEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table entry containing information about software features."
		INDEX	  { extremeImageFeatureNumber }
			::= { extremeImageFeatureTable 1 }

	ExtremeImageFeatureEntry ::= SEQUENCE {
                extremeImageFeatureNumber 		INTEGER,
                extremeImageSshCapability       INTEGER,
                extremeImageUAACapability       INTEGER
	}

        extremeImageFeatureNumber OBJECT-TYPE
		SYNTAX  INTEGER {
                       cur(0),
                       pri(1),
                       sec(2)
                }
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"A unique integer identifying the particular software
                image."
		::= { extremeImageFeatureEntry 1 }

        extremeImageSshCapability   OBJECT-TYPE
		SYNTAX  INTEGER {
                       unknown(0),
                       nossh(1),
                       ssh(2)
                      }
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"Indicates whether image has ssh capability."
		::= { extremeImageFeatureEntry 2 }

        extremeImageUAACapability   OBJECT-TYPE
		SYNTAX  INTEGER {
                       unknown(0),
                       nouaa(1),
                       uaa(2)
                      }
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"Indicates whether image has Wireless(UAA) components."
		::= { extremeImageFeatureEntry 3 }

---------------------------------------------------------------------------
	-- Objects specific to Chassis products
	extremeChassisGroup OBJECT IDENTIFIER ::=	{ extremeSystem 2}

	extremeMasterMSMSlot OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The extremeSlotNumber of the master MSM module."
	::= { extremeChassisGroup 1  }
	
	extremeChassisPortsPerSlot OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The maximum number of ports that can be accomodated
		in a single slot. This number would change to accomodate
		blades with higher port density than current ones."
	::= { extremeChassisGroup 3  }
	
	extremeSlotTable OBJECT-TYPE
		SYNTAX  SEQUENCE OF ExtremeSlotEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table containing information about each slot in the 
		chassis."
			::= { extremeChassisGroup 2 }

	extremeSlotEntry OBJECT-TYPE
		SYNTAX  ExtremeSlotEntry
		MAX-ACCESS  not-accessible
		STATUS current
		DESCRIPTION
		"A table entry containing information about the module in 
		each slot of the chassis."
		INDEX	  { extremeSlotNumber }
			::= { extremeSlotTable 1 }

	ExtremeSlotEntry ::= SEQUENCE {
		extremeSlotNumber 		INTEGER,	
		extremeSlotName			DisplayString,
		extremeSlotModuleConfiguredType	INTEGER,
		extremeSlotModuleInsertedType	INTEGER,
		extremeSlotModuleState		INTEGER,	
		extremeSlotModuleSerialNumber	DisplayString
	}

	extremeSlotNumber OBJECT-TYPE
		SYNTAX  INTEGER
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"A unique integer identifying the particular slot 
		in the chassis."
		::= { extremeSlotEntry 1 }

	extremeSlotName   OBJECT-TYPE
		SYNTAX  DisplayString
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"A name identifying the particular slot in the chassis."
		::= { extremeSlotEntry 2 }

	extremeSlotModuleConfiguredType OBJECT-TYPE
		SYNTAX  INTEGER	{
			none(1),
			fe32(2),
			g4x(3),
			g6x(4),
			fe32fx(5),
			f48ti(7),
			g8xi(8),
			g8ti(9),
			g12sxi(10),
			g12ti(11),
			fm32t(21),
			gm4x(22),
			gm4sx(23),
			gm4t(24),
            wdm8(25),
			fm24f(26),
			fm24sf(27),
			fm24te(28),
			f96ti(29),
	        wdm4(30),
			f32fi(31),
            tenGx3(32),
            tenGigLR(33),
            g16x3(34),
            g24t3(35),
            gm16x3(36),
            gm16t3(37),
            fm16t3(38),
            fm32p(39),
            fm8v(50), -- vdsl blade
            wm4t1(51), -- 4port t1
            wm4t3(52), -- 4port t3
            wm1t3(53), -- 1port t3
            wm4e1(54),  -- 4port e1
			p3c(101),
            p12c(102),
            arm(103),
            mpls(104),
            sma(105),
            p48c(106),
            a3c(107),
            a12c(108),
	        pxm(200),
            s300fixed(201)
		}
		MAX-ACCESS  read-write
		STATUS current
		DESCRIPTION
		"The configured module type for the given slot. 
		At startup, the module-type is none(1). It is 
		possible to configure the module-type even if there 
		is no module in the slot. If the current module in the 
		slot is different than the requested configured module-type, 
		then the current configuration for the module is erased and 
		the card will be restarted. The new configured module-type 
		will be recorded. Since the configured module type is different 
		than the actual module type, a moduleMismatch trap will be sent,
 		and the extremeSlotModuleState for that module will show a 
		mismatch(3). Setting this variable to none(1) will clear the 
		previously assigned module-type of this slot, and all 
		configuration information related to the slot will be erased."
		::= { extremeSlotEntry 3 }

	extremeSlotModuleInsertedType OBJECT-TYPE
		SYNTAX  INTEGER	{
			none(1),
			fe32(2),
			g4x(3),
			g6x(4),
			fe32fx(5),
			msm(6),
			f48ti(7),
			g8xi(8),
			g8ti(9),
			g12sxi(10),
			g12ti(11),
			msm64i(18),
			alpine3808(19),
			alpine3804(20),
			fm32t(21),
			gm4x(22),
			gm4sx(23),
			gm4t(24),
            wdm8(25),
			fm24f(26), 
			fm24sf(27),
			fm24te(28),
			f96ti(29),
	        wdm4(30),
			f32fi(31),
            tenGx3(32),
            tenGigLR(33),   
            g16x3(34),
            g24t3(35),
            gm16x3(36),
            gm16t3(37),
            fm16t3(38),
            fm32p(39),
            fm8v(50), -- vdsl blade
            wm4t1(51), -- 4port t1
            wm4t3(52), -- 4port t3
            wm1t3(53), -- 1port t3
            wm4e1(54),  -- 4port e1
            alpine3802(55),
			p3c(101),
            p12c(102),
            arm(103),
            mpls(104),
            sma(105),
            p48c(106),
            a3c(107),
            a12c(108),
	        pxm(200),
            s300fixed(201),
            msm3(202)
		}
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The module type inserted into the slot. It is possible 
		to have a slot inserted into the slot even though 
		extremeSlotConfiguredType is none(1)."
		::= { extremeSlotEntry 4 }

	extremeSlotModuleState OBJECT-TYPE
		SYNTAX  INTEGER	{
			notPresent(1),
			testing(2),
			mismatch(3),
			failed(4),
			operational(5),
                        powerdown(6),
			unknown(7),
                        present(8),
                        poweron(9),
                        post(10),
                        downloading(11),
                        booting(12),
                        offline(13),
                        initializing(14),
                        invalid(100) 

		}
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The state of the module inserted in this slot."
		::= { extremeSlotEntry 5 }

	extremeSlotModuleSerialNumber OBJECT-TYPE
		SYNTAX  DisplayString
		MAX-ACCESS  read-only
		STATUS current
		DESCRIPTION
		"The serial number of the module inserted in this slot."
		::= { extremeSlotEntry 6 }
	extremeSystemHealthCheck OBJECT IDENTIFIER
		::= { extremeSystem 3 }

	extremeHealthCheckErrorType OBJECT-TYPE
		SYNTAX INTEGER { 
				unknown(1), 
				cpuPacket(2), 
				backplane(3), 
				hardwareFail(4),
				pbusChecksum(5)
				}			
		MAX-ACCESS accessible-for-notify
		STATUS current
		DESCRIPTION
		"The error reported in the system health check trap"
		::= { extremeSystemHealthCheck 1 }

	extremeHealthCheckAction OBJECT-TYPE
		SYNTAX INTEGER {
				syslogOnly(1),
				healthCheckTrap(2),
				ioModuleDown(3),
				systemDown(4),
				autoRecovery(5)
				}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
		"The action/alarm level that has been configured for health check."
		::= { extremeSystemHealthCheck 2 }

	extremeHealthCheckMaxRetries OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
		"The maximum number of times a module restart will be attempted if it fails. 
		If extremeHealthCheckAction is not autorecovery(5), then this value is zero."
		::= { extremeSystemHealthCheck 3 }

-- =========================================================================== 
 
  extremeSystemThresholds OBJECT IDENTIFIER
        ::= { extremeSystem  4 }

  extremeCpuUtilRisingThreshold OBJECT-TYPE
        SYNTAX INTEGER (0..100)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                  "Rising threshold for CPU Aggregation utilization trap"
	::= { extremeSystemThresholds 1 }

  extremeCpuTaskUtilPair OBJECT-TYPE
                SYNTAX DisplayString 
        	    MAX-ACCESS accessible-for-notify
                STATUS current
                DESCRIPTION
                  "TaskName/CPU_% Util pair reported in CPU Utilization trap"
	::= { extremeSystemThresholds 2 }


END



-- =========================================================================

--
-- Extreme VLAN objects
--

