#include "BLI_ghash.h"
#include <stdarg.h>

Go to the source code of this file.

Classes
union	eBMOpSlotSubType_Union

struct	BMO_FlagSet

struct	BMOpSlot

struct	BMOperator

struct	BMOSlotType

struct	BMOpDefine

struct	BMOIter

Macros
#define	BMO_elem_flag_test(bm, ele, oflag) _bmo_elem_flag_test(bm, BMO_elem_flag_from_header(&(ele)->head), oflag)

#define	BMO_elem_flag_test_bool(bm, ele, oflag) _bmo_elem_flag_test_bool(bm, BMO_elem_flag_from_header(&(ele)->head), oflag)

#define	BMO_elem_flag_enable(bm, ele, oflag)

#define	BMO_elem_flag_disable(bm, ele, oflag)

#define	BMO_elem_flag_set(bm, ele, oflag, val)

#define	BMO_elem_flag_toggle(bm, ele, oflag)

#define	_BMO_CAST_V_CONST(e) (BM_CHECK_TYPE_VERT(e), (const BMVert_OFlag *)e)

#define	_BMO_CAST_E_CONST(e) (BM_CHECK_TYPE_EDGE(e), (const BMEdge_OFlag *)e)

#define	_BMO_CAST_F_CONST(e) (BM_CHECK_TYPE_FACE(e), (const BMFace_OFlag *)e)

#define	_BMO_CAST_V(e) (BM_CHECK_TYPE_VERT_NONCONST(e), (BMVert_OFlag *)e)

#define	_BMO_CAST_E(e) (BM_CHECK_TYPE_EDGE_NONCONST(e), (BMEdge_OFlag *)e)

#define	_BMO_CAST_F(e) (BM_CHECK_TYPE_FACE_NONCONST(e), (BMFace_OFlag *)e)

#define	BMO_vert_flag_test(bm, e, oflag) _bmo_elem_flag_test(bm, _BMO_CAST_V_CONST(e)->oflags, oflag)

#define	BMO_vert_flag_test_bool(bm, e, oflag) _bmo_elem_flag_test_bool(bm, _BMO_CAST_V_CONST(e)->oflags, oflag)

#define	BMO_vert_flag_enable(bm, e, oflag) _bmo_elem_flag_enable(bm, _BMO_CAST_V(e)->oflags, oflag)

#define	BMO_vert_flag_disable(bm, e, oflag) _bmo_elem_flag_disable(bm, _BMO_CAST_V(e)->oflags, oflag)

#define	BMO_vert_flag_set(bm, e, oflag, val) _bmo_elem_flag_set(bm, _BMO_CAST_V(e)->oflags, oflag, val)

#define	BMO_vert_flag_toggle(bm, e, oflag) _bmo_elem_flag_toggle(bm, _BMO_CAST_V(e)->oflags, oflag)

#define	BMO_edge_flag_test(bm, e, oflag) _bmo_elem_flag_test(bm, _BMO_CAST_E_CONST(e)->oflags, oflag)

#define	BMO_edge_flag_test_bool(bm, e, oflag) _bmo_elem_flag_test_bool(bm, _BMO_CAST_E_CONST(e)->oflags, oflag)

#define	BMO_edge_flag_enable(bm, e, oflag) _bmo_elem_flag_enable(bm, _BMO_CAST_E(e)->oflags, oflag)

#define	BMO_edge_flag_disable(bm, e, oflag) _bmo_elem_flag_disable(bm, _BMO_CAST_E(e)->oflags, oflag)

#define	BMO_edge_flag_set(bm, e, oflag, val) _bmo_elem_flag_set(bm, _BMO_CAST_E(e)->oflags, oflag, val)

#define	BMO_edge_flag_toggle(bm, e, oflag) _bmo_elem_flag_toggle(bm, _BMO_CAST_E(e)->oflags, oflag)

#define	BMO_face_flag_test(bm, e, oflag) _bmo_elem_flag_test(bm, _BMO_CAST_F_CONST(e)->oflags, oflag)

#define	BMO_face_flag_test_bool(bm, e, oflag) _bmo_elem_flag_test_bool(bm, _BMO_CAST_F_CONST(e)->oflags, oflag)

#define	BMO_face_flag_enable(bm, e, oflag) _bmo_elem_flag_enable(bm, _BMO_CAST_F(e)->oflags, oflag)

#define	BMO_face_flag_disable(bm, e, oflag) _bmo_elem_flag_disable(bm, _BMO_CAST_F(e)->oflags, oflag)

#define	BMO_face_flag_set(bm, e, oflag, val) _bmo_elem_flag_set(bm, _BMO_CAST_F(e)->oflags, oflag, val)

#define	BMO_face_flag_toggle(bm, e, oflag) _bmo_elem_flag_toggle(bm, _BMO_CAST_F(e)->oflags, oflag)

#define	BMO_OP_SLOT_TOTAL_TYPES 11

#define	BMO_SLOT_AS_BOOL(slot) ((slot)->data.i)

#define	BMO_SLOT_AS_INT(slot) ((slot)->data.i)

#define	BMO_SLOT_AS_FLOAT(slot) ((slot)->data.f)

#define	BMO_SLOT_AS_VECTOR(slot) ((slot)->data.vec)

#define	BMO_SLOT_AS_MATRIX(slot) ((float(*)[4])((slot)->data.p))

#define	BMO_SLOT_AS_BUFFER(slot) ((slot)->data.buf)

#define	BMO_SLOT_AS_GHASH(slot) ((slot)->data.ghash)

#define	BMO_ASSERT_SLOT_IN_OP(slot, op)

#define	BMO_OP_MAX_SLOTS 21

#define	BMO_FLAG_DEFAULTS BMO_FLAG_RESPECT_HIDE

#define	MAX_SLOTNAME 32

#define	BMO_slot_copy(op_src, slots_src, slot_name_src, op_dst, slots_dst, slot_name_dst)

#define	BMO_slot_buffer_append(op_src, slots_src, slot_name_src, op_dst, slots_dst, slot_name_dst)

#define	BMO_ITER(ele, iter, slot_args, slot_name, restrict_flag)

#define	BMO_ITER_INDEX(ele, iter, slot_args, slot_name, restrict_flag, i_)

Typedefs
typedef enum eBMOpSlotType	eBMOpSlotType

typedef enum eBMOpSlotSubType_Elem	eBMOpSlotSubType_Elem

typedef enum eBMOpSlotSubType_Map	eBMOpSlotSubType_Map

typedef enum eBMOpSlotSubType_Ptr	eBMOpSlotSubType_Ptr

typedef enum eBMOpSlotSubType_Int	eBMOpSlotSubType_Int

typedef union eBMOpSlotSubType_Union	eBMOpSlotSubType_Union

typedef struct BMO_FlagSet	BMO_FlagSet

typedef struct BMOpSlot	BMOpSlot

typedef struct BMOperator	BMOperator

typedef struct BMOSlotType	BMOSlotType

typedef struct BMOpDefine	BMOpDefine

typedef struct BMOIter	BMOIter

Enumerations
enum	eBMOpSlotType { BMO_OP_SLOT_BOOL = 1 , BMO_OP_SLOT_INT = 2 , BMO_OP_SLOT_FLT = 3 , BMO_OP_SLOT_PTR = 4 , BMO_OP_SLOT_MAT = 5 , BMO_OP_SLOT_VEC = 8 , BMO_OP_SLOT_ELEMENT_BUF = 9 , BMO_OP_SLOT_MAPPING = 10 }

enum	eBMOpSlotSubType_Elem { BMO_OP_SLOT_SUBTYPE_ELEM_VERT = BM_VERT , BMO_OP_SLOT_SUBTYPE_ELEM_EDGE = BM_EDGE , BMO_OP_SLOT_SUBTYPE_ELEM_FACE = BM_FACE , BMO_OP_SLOT_SUBTYPE_ELEM_IS_SINGLE = (BM_FACE << 1) }

enum	eBMOpSlotSubType_Map { BMO_OP_SLOT_SUBTYPE_MAP_EMPTY = 64 , BMO_OP_SLOT_SUBTYPE_MAP_ELEM = 65 , BMO_OP_SLOT_SUBTYPE_MAP_FLT = 66 , BMO_OP_SLOT_SUBTYPE_MAP_INT = 67 , BMO_OP_SLOT_SUBTYPE_MAP_BOOL = 68 , BMO_OP_SLOT_SUBTYPE_MAP_INTERNAL = 69 }

enum	eBMOpSlotSubType_Ptr { BMO_OP_SLOT_SUBTYPE_PTR_BMESH = 100 , BMO_OP_SLOT_SUBTYPE_PTR_SCENE = 101 , BMO_OP_SLOT_SUBTYPE_PTR_OBJECT = 102 , BMO_OP_SLOT_SUBTYPE_PTR_MESH = 103 , BMO_OP_SLOT_SUBTYPE_PTR_STRUCT = 104 }

enum	eBMOpSlotSubType_Int { BMO_OP_SLOT_SUBTYPE_INT_ENUM = 200 , BMO_OP_SLOT_SUBTYPE_INT_FLAG = 201 }

enum	BMOpTypeFlag { BMO_OPTYPE_FLAG_NOP = 0 , BMO_OPTYPE_FLAG_UNTAN_MULTIRES = (1 << 0) , BMO_OPTYPE_FLAG_NORMALS_CALC = (1 << 1) , BMO_OPTYPE_FLAG_SELECT_FLUSH = (1 << 2) , BMO_OPTYPE_FLAG_SELECT_VALIDATE = (1 << 3) , BMO_OPTYPE_FLAG_INVALIDATE_CLNOR_ALL = (1 << 4) }

enum	{ BMO_FLAG_RESPECT_HIDE = 1 }

enum	{ DEL_VERTS = 1 , DEL_EDGES , DEL_ONLYFACES , DEL_EDGESFACES , DEL_FACES , DEL_FACES_KEEP_BOUNDARY , DEL_ONLYTAGGED }

enum	BMO_SymmDirection { BMO_SYMMETRIZE_NEGATIVE_X , BMO_SYMMETRIZE_NEGATIVE_Y , BMO_SYMMETRIZE_NEGATIVE_Z , BMO_SYMMETRIZE_POSITIVE_X , BMO_SYMMETRIZE_POSITIVE_Y , BMO_SYMMETRIZE_POSITIVE_Z }

enum	BMO_Delimit { BMO_DELIM_NORMAL = 1 << 0 , BMO_DELIM_MATERIAL = 1 << 1 , BMO_DELIM_SEAM = 1 << 2 , BMO_DELIM_SHARP = 1 << 3 , BMO_DELIM_UV = 1 << 4 }

Functions
BLI_INLINE BMFlagLayer *	BMO_elem_flag_from_header (BMHeader *ele_head)

BLI_INLINE short	_bmo_elem_flag_test (BMesh bm, const BMFlagLayer oflags, const short oflag)

BLI_INLINE bool	_bmo_elem_flag_test_bool (BMesh bm, const BMFlagLayer oflags, const short oflag)

BLI_INLINE void	_bmo_elem_flag_enable (BMesh bm, BMFlagLayer oflags, const short oflag)

BLI_INLINE void	_bmo_elem_flag_disable (BMesh bm, BMFlagLayer oflags, const short oflag)

BLI_INLINE void	_bmo_elem_flag_set (BMesh bm, BMFlagLayer oflags, const short oflag, int val)

BLI_INLINE void	_bmo_elem_flag_toggle (BMesh bm, BMFlagLayer oflags, const short oflag)

void	BMO_op_init (BMesh bm, BMOperator op, const int flag, const char *opname)
	BMESH OPSTACK INIT OP. More...

void	BMO_op_exec (BMesh bm, BMOperator op)
	BMESH OPSTACK EXEC OP. More...

void	BMO_op_finish (BMesh bm, BMOperator op)
	BMESH OPSTACK FINISH OP. More...

int	BMO_mesh_enabled_flag_count (BMesh *bm, const char htype, const short oflag)

int	BMO_mesh_disabled_flag_count (BMesh *bm, const char htype, const short oflag)

void	BMO_push (BMesh bm, BMOperator op)

void	BMO_pop (BMesh *bm)
	BMESH OPSTACK POP. More...

bool	BMO_op_callf (BMesh bm, const int flag, const char fmt,...)

bool	BMO_op_initf (BMesh bm, BMOperator op, const int flag, const char *fmt,...)

bool	BMO_op_vinitf (BMesh bm, BMOperator op, const int flag, const char *fmt, va_list vlist)
	Format Strings for BMOperator Initialization. More...

bool	BMO_slot_exists (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *identifier)
	BMESH OPSTACK HAS SLOT. More...

BMOpSlot *	BMO_slot_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *identifier)
	BMESH OPSTACK GET SLOT. More...

void	_bmo_slot_copy (BMOpSlot slot_args_src[BMO_OP_MAX_SLOTS], const char slot_name_src, BMOpSlot slot_args_dst[BMO_OP_MAX_SLOTS], const char slot_name_dst, struct MemArena *arena_dst)
	BMESH OPSTACK COPY SLOT. More...

void	BMO_op_flag_enable (BMesh bm, BMOperator op, const int op_flag)

void	BMO_op_flag_disable (BMesh bm, BMOperator op, const int op_flag)

void	BMO_slot_float_set (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const float f)

float	BMO_slot_float_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void	BMO_slot_int_set (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const int i)

int	BMO_slot_int_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void	BMO_slot_bool_set (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const bool i)

bool	BMO_slot_bool_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void *	BMO_slot_as_arrayN (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, int len)

void	BMO_slot_ptr_set (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, void p)

void *	BMO_slot_ptr_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void	BMO_slot_vec_set (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const float vec[3])

void	BMO_slot_vec_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, float r_vec[3])

void	BMO_slot_mat_set (BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const float *mat, int size)

void	BMO_slot_mat4_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, float r_mat[4][4])

void	BMO_slot_mat3_get (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, float r_mat[3][3])

void	BMO_mesh_flag_disable_all (BMesh bm, BMOperator op, const char htype, const short oflag)

void	BMO_mesh_selected_remap (BMesh bm, BMOpSlot slot_vert_map, BMOpSlot slot_edge_map, BMOpSlot slot_face_map, const bool check_select)

void	_bmo_slot_buffer_append (BMOpSlot slot_args_dst[BMO_OP_MAX_SLOTS], const char slot_name_dst, BMOpSlot slot_args_src[BMO_OP_MAX_SLOTS], const char slot_name_src, struct MemArena *arena_dst)

void	BMO_slot_buffer_from_enabled_flag (BMesh bm, BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const char htype, const short oflag)

void	BMO_slot_buffer_from_disabled_flag (BMesh bm, BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const char htype, const short oflag)

void	BMO_slot_buffer_flag_enable (BMesh bm, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char htype, const short oflag)
	BMO_FLAG_BUFFER. More...

void	BMO_slot_buffer_flag_disable (BMesh bm, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char htype, const short oflag)
	BMO_FLAG_BUFFER. More...

void	BMO_slot_buffer_hflag_enable (BMesh bm, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char htype, const char hflag, const bool do_flush)
	BMO_FLAG_BUFFER. More...

void	BMO_slot_buffer_hflag_disable (BMesh bm, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char htype, const char hflag, const bool do_flush)
	BMO_FLAG_BUFFER. More...

void	BMO_slot_buffer_from_enabled_hflag (BMesh bm, BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const char htype, const char hflag)

void	BMO_slot_buffer_from_disabled_hflag (BMesh bm, BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const char htype, const char hflag)

void	BMO_slot_buffer_from_array (BMOperator op, BMOpSlot slot, BMHeader **ele_buffer, int ele_buffer_len)

void	BMO_slot_buffer_from_single (BMOperator op, BMOpSlot slot, BMHeader *ele)

void *	BMO_slot_buffer_get_single (BMOpSlot *slot)

int	BMO_slot_buffer_count (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

int	BMO_slot_map_count (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void	BMO_slot_map_insert (BMOperator op, BMOpSlot slot, const void element, const void data)

void	BMO_slot_map_to_flag (BMesh bm, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char htype, const short oflag)

void *	BMO_slot_buffer_alloc (BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const int len)

void	BMO_slot_buffer_from_all (BMesh bm, BMOperator op, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name, const char htype)
	BMO_ALL_TO_SLOT. More...

void *	BMO_slot_buffer_get_first (BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char *slot_name)

void *	BMO_iter_new (BMOIter iter, BMOpSlot slot_args[BMO_OP_MAX_SLOTS], const char slot_name, const char restrictmask)
	New Iterator. More...

void *	BMO_iter_step (BMOIter *iter)

void **	BMO_iter_map_value_p (BMOIter *iter)

void *	BMO_iter_map_value_ptr (BMOIter *iter)

float	BMO_iter_map_value_float (BMOIter *iter)

int	BMO_iter_map_value_int (BMOIter *iter)

bool	BMO_iter_map_value_bool (BMOIter *iter)

int	BMO_opcode_from_opname (const char *opname)

Variables
const int	BMO_OPSLOT_TYPEINFO [BMO_OP_SLOT_TOTAL_TYPES]

Macro Definition Documentation

◆ _BMO_CAST_E

#define _BMO_CAST_E ( e ) (BM_CHECK_TYPE_EDGE_NONCONST(e), (BMEdge_OFlag *)e)

Definition at line 151 of file bmesh_operator_api.h.

◆ _BMO_CAST_E_CONST

#define _BMO_CAST_E_CONST ( e ) (BM_CHECK_TYPE_EDGE(e), (const BMEdge_OFlag *)e)

Definition at line 148 of file bmesh_operator_api.h.

◆ _BMO_CAST_F

#define _BMO_CAST_F ( e ) (BM_CHECK_TYPE_FACE_NONCONST(e), (BMFace_OFlag *)e)

Definition at line 152 of file bmesh_operator_api.h.

◆ _BMO_CAST_F_CONST

#define _BMO_CAST_F_CONST ( e ) (BM_CHECK_TYPE_FACE(e), (const BMFace_OFlag *)e)

Definition at line 149 of file bmesh_operator_api.h.

◆ _BMO_CAST_V

#define _BMO_CAST_V ( e ) (BM_CHECK_TYPE_VERT_NONCONST(e), (BMVert_OFlag *)e)

Definition at line 150 of file bmesh_operator_api.h.

◆ _BMO_CAST_V_CONST

#define _BMO_CAST_V_CONST ( e ) (BM_CHECK_TYPE_VERT(e), (const BMVert_OFlag *)e)

Definition at line 147 of file bmesh_operator_api.h.

◆ BMO_ASSERT_SLOT_IN_OP

#define BMO_ASSERT_SLOT_IN_OP	(	slot,
		op
	)

Value:

BLI_assert(((slot >= (op)->slots_in) && (slot < &(op)->slots_in[BMO_OP_MAX_SLOTS])) || \

((slot >= (op)->slots_out) && (slot < &(op)->slots_out[BMO_OP_MAX_SLOTS])))

BLI_assert

#define BLI_assert(a)

Definition: BLI_assert.h:58

BMO_OP_MAX_SLOTS

#define BMO_OP_MAX_SLOTS

Definition: bmesh_operator_api.h:298

Definition at line 293 of file bmesh_operator_api.h.

◆ BMO_edge_flag_disable

#define BMO_edge_flag_disable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_disable(bm, _BMO_CAST_E(e)->oflags, oflag)

Definition at line 171 of file bmesh_operator_api.h.

◆ BMO_edge_flag_enable

#define BMO_edge_flag_enable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_enable(bm, _BMO_CAST_E(e)->oflags, oflag)

Definition at line 170 of file bmesh_operator_api.h.

◆ BMO_edge_flag_set

#define BMO_edge_flag_set	(	bm,
		e,
		oflag,
		val
	)	_bmo_elem_flag_set(bm, _BMO_CAST_E(e)->oflags, oflag, val)

Definition at line 173 of file bmesh_operator_api.h.

◆ BMO_edge_flag_test

#define BMO_edge_flag_test	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test(bm, _BMO_CAST_E_CONST(e)->oflags, oflag)

Definition at line 166 of file bmesh_operator_api.h.

◆ BMO_edge_flag_test_bool

#define BMO_edge_flag_test_bool	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test_bool(bm, _BMO_CAST_E_CONST(e)->oflags, oflag)

Definition at line 168 of file bmesh_operator_api.h.

◆ BMO_edge_flag_toggle

#define BMO_edge_flag_toggle	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_toggle(bm, _BMO_CAST_E(e)->oflags, oflag)

Definition at line 175 of file bmesh_operator_api.h.

◆ BMO_elem_flag_disable

#define BMO_elem_flag_disable	(	bm,
		ele,
		oflag
	)

Value:

_bmo_elem_flag_disable( \

bm, (BM_CHECK_TYPE_ELEM_NONCONST(ele), BMO_elem_flag_from_header(&(ele)->head)), oflag)

BM_CHECK_TYPE_ELEM_NONCONST

#define BM_CHECK_TYPE_ELEM_NONCONST(ele)

Definition: bmesh_class.h:433

bm

ATTR_WARN_UNUSED_RESULT BMesh * bm

Definition: bmesh_iterators_inline.h:165

BMO_elem_flag_from_header

BLI_INLINE BMFlagLayer * BMO_elem_flag_from_header(BMHeader *ele_head)

Definition: bmesh_operator_api.h:71

_bmo_elem_flag_disable

BLI_INLINE void _bmo_elem_flag_disable(BMesh *bm, BMFlagLayer *oflags, const short oflag)

Definition: bmesh_operator_api_inline.h:56

oflag

ATTR_WARN_UNUSED_RESULT const BMFlagLayer const short oflag

Definition: bmesh_operator_api_inline.h:36

Definition at line 90 of file bmesh_operator_api.h.

◆ BMO_elem_flag_enable

#define BMO_elem_flag_enable	(	bm,
		ele,
		oflag
	)

Value:

_bmo_elem_flag_enable( \

bm, (BM_CHECK_TYPE_ELEM_NONCONST(ele), BMO_elem_flag_from_header(&(ele)->head)), oflag)

_bmo_elem_flag_enable

BLI_INLINE void _bmo_elem_flag_enable(BMesh *bm, BMFlagLayer *oflags, const short oflag)

Definition: bmesh_operator_api_inline.h:49

Definition at line 87 of file bmesh_operator_api.h.

◆ BMO_elem_flag_set

#define BMO_elem_flag_set	(	bm,
		ele,
		oflag,
		val
	)

Value:

  _bmo_elem_flag_set(bm, \
                     (BM_CHECK_TYPE_ELEM_NONCONST(ele), BMO_elem_flag_from_header(&(ele)->head)), \
                     oflag, \
                     val)

Definition at line 93 of file bmesh_operator_api.h.

◆ BMO_elem_flag_test

#define BMO_elem_flag_test	(	bm,
		ele,
		oflag
	)	_bmo_elem_flag_test(bm, BMO_elem_flag_from_header(&(ele)->head), oflag)

Definition at line 83 of file bmesh_operator_api.h.

◆ BMO_elem_flag_test_bool

#define BMO_elem_flag_test_bool	(	bm,
		ele,
		oflag
	)	_bmo_elem_flag_test_bool(bm, BMO_elem_flag_from_header(&(ele)->head), oflag)

Definition at line 85 of file bmesh_operator_api.h.

◆ BMO_elem_flag_toggle

#define BMO_elem_flag_toggle	(	bm,
		ele,
		oflag
	)

Value:

_bmo_elem_flag_toggle( \

bm, (BM_CHECK_TYPE_ELEM_NONCONST(ele), BMO_elem_flag_from_header(&(ele)->head)), oflag)

_bmo_elem_flag_toggle

BLI_INLINE void _bmo_elem_flag_toggle(BMesh *bm, BMFlagLayer *oflags, const short oflag)

Definition: bmesh_operator_api_inline.h:75

Definition at line 98 of file bmesh_operator_api.h.

◆ BMO_face_flag_disable

#define BMO_face_flag_disable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_disable(bm, _BMO_CAST_F(e)->oflags, oflag)

Definition at line 182 of file bmesh_operator_api.h.

◆ BMO_face_flag_enable

#define BMO_face_flag_enable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_enable(bm, _BMO_CAST_F(e)->oflags, oflag)

Definition at line 181 of file bmesh_operator_api.h.

◆ BMO_face_flag_set

#define BMO_face_flag_set	(	bm,
		e,
		oflag,
		val
	)	_bmo_elem_flag_set(bm, _BMO_CAST_F(e)->oflags, oflag, val)

Definition at line 184 of file bmesh_operator_api.h.

◆ BMO_face_flag_test

#define BMO_face_flag_test	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test(bm, _BMO_CAST_F_CONST(e)->oflags, oflag)

Definition at line 177 of file bmesh_operator_api.h.

◆ BMO_face_flag_test_bool

#define BMO_face_flag_test_bool	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test_bool(bm, _BMO_CAST_F_CONST(e)->oflags, oflag)

Definition at line 179 of file bmesh_operator_api.h.

◆ BMO_face_flag_toggle

#define BMO_face_flag_toggle	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_toggle(bm, _BMO_CAST_F(e)->oflags, oflag)

Definition at line 186 of file bmesh_operator_api.h.

◆ BMO_FLAG_DEFAULTS

#define BMO_FLAG_DEFAULTS BMO_FLAG_RESPECT_HIDE

Definition at line 325 of file bmesh_operator_api.h.

◆ BMO_ITER

#define BMO_ITER	(	ele,
		iter,
		slot_args,
		slot_name,
		restrict_flag
	)

Value:

  for (BM_CHECK_TYPE_ELEM_ASSIGN(ele) = BMO_iter_new(iter, slot_args, slot_name, restrict_flag); \
       ele; \
       BM_CHECK_TYPE_ELEM_ASSIGN(ele) = BMO_iter_step(iter))

Definition at line 652 of file bmesh_operator_api.h.

◆ BMO_ITER_INDEX

#define BMO_ITER_INDEX	(	ele,
		iter,
		slot_args,
		slot_name,
		restrict_flag,
		i_
	)

Value:

  for (BM_CHECK_TYPE_ELEM_ASSIGN(ele) = BMO_iter_new(iter, slot_args, slot_name, restrict_flag), \
      i_ = 0; \
       ele; \
       BM_CHECK_TYPE_ELEM_ASSIGN(ele) = BMO_iter_step(iter), i_++)

Definition at line 657 of file bmesh_operator_api.h.

◆ BMO_OP_MAX_SLOTS

#define BMO_OP_MAX_SLOTS 21

Definition at line 298 of file bmesh_operator_api.h.

◆ BMO_OP_SLOT_TOTAL_TYPES

#define BMO_OP_SLOT_TOTAL_TYPES 11

Definition at line 216 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_BOOL

#define BMO_SLOT_AS_BOOL ( slot ) ((slot)->data.i)

Definition at line 285 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_BUFFER

#define BMO_SLOT_AS_BUFFER ( slot ) ((slot)->data.buf)

Definition at line 290 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_FLOAT

#define BMO_SLOT_AS_FLOAT ( slot ) ((slot)->data.f)

Definition at line 287 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_GHASH

#define BMO_SLOT_AS_GHASH ( slot ) ((slot)->data.ghash)

Definition at line 291 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_INT

#define BMO_SLOT_AS_INT ( slot ) ((slot)->data.i)

Definition at line 286 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_MATRIX

#define BMO_SLOT_AS_MATRIX ( slot ) ((float(*)[4])((slot)->data.p))

Definition at line 289 of file bmesh_operator_api.h.

◆ BMO_SLOT_AS_VECTOR

#define BMO_SLOT_AS_VECTOR ( slot ) ((slot)->data.vec)

Definition at line 288 of file bmesh_operator_api.h.

◆ BMO_slot_buffer_append

#define BMO_slot_buffer_append	(	op_src,
		slots_src,
		slot_name_src,
		op_dst,
		slots_dst,
		slot_name_dst
	)

Value:

_bmo_slot_buffer_append( \

(op_src)->slots_src, slot_name_src, (op_dst)->slots_dst, slot_name_dst, (op_dst)->arena)

_bmo_slot_buffer_append

void _bmo_slot_buffer_append(BMOpSlot slot_args_dst[BMO_OP_MAX_SLOTS], const char *slot_name_dst, BMOpSlot slot_args_src[BMO_OP_MAX_SLOTS], const char *slot_name_src, struct MemArena *arena_dst)

Definition: bmesh_operators.c:1004

Definition at line 483 of file bmesh_operator_api.h.

◆ BMO_slot_copy

#define BMO_slot_copy	(	op_src,
		slots_src,
		slot_name_src,
		op_dst,
		slots_dst,
		slot_name_dst
	)

Value:

_bmo_slot_copy( \

(op_src)->slots_src, slot_name_src, (op_dst)->slots_dst, slot_name_dst, (op_dst)->arena)

_bmo_slot_copy

void _bmo_slot_copy(BMOpSlot slot_args_src[BMO_OP_MAX_SLOTS], const char *slot_name_src, BMOpSlot slot_args_dst[BMO_OP_MAX_SLOTS], const char *slot_name_dst, struct MemArena *arena_dst)

BMESH OPSTACK COPY SLOT.

Definition: bmesh_operators.c:287

Definition at line 392 of file bmesh_operator_api.h.

◆ BMO_vert_flag_disable

#define BMO_vert_flag_disable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_disable(bm, _BMO_CAST_V(e)->oflags, oflag)

Definition at line 160 of file bmesh_operator_api.h.

◆ BMO_vert_flag_enable

#define BMO_vert_flag_enable	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_enable(bm, _BMO_CAST_V(e)->oflags, oflag)

Definition at line 159 of file bmesh_operator_api.h.

◆ BMO_vert_flag_set

#define BMO_vert_flag_set	(	bm,
		e,
		oflag,
		val
	)	_bmo_elem_flag_set(bm, _BMO_CAST_V(e)->oflags, oflag, val)

Definition at line 162 of file bmesh_operator_api.h.

◆ BMO_vert_flag_test

#define BMO_vert_flag_test	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test(bm, _BMO_CAST_V_CONST(e)->oflags, oflag)

Definition at line 155 of file bmesh_operator_api.h.

◆ BMO_vert_flag_test_bool

#define BMO_vert_flag_test_bool	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_test_bool(bm, _BMO_CAST_V_CONST(e)->oflags, oflag)

Definition at line 157 of file bmesh_operator_api.h.

◆ BMO_vert_flag_toggle

#define BMO_vert_flag_toggle	(	bm,
		e,
		oflag
	)	_bmo_elem_flag_toggle(bm, _BMO_CAST_V(e)->oflags, oflag)

Definition at line 164 of file bmesh_operator_api.h.

◆ MAX_SLOTNAME

#define MAX_SLOTNAME 32

Definition at line 327 of file bmesh_operator_api.h.

Typedef Documentation

◆ BMO_FlagSet

typedef struct BMO_FlagSet BMO_FlagSet

◆ BMOIter

typedef struct BMOIter BMOIter

This part of the API is used to iterate over element buffer or mapping slots.

for example, iterating over the faces in a slot is:

   BMOIter oiter;
   BMFace *f;
 
   f = BMO_iter_new(&oiter, some_operator, "slot_name", BM_FACE);
   for (; f; f = BMO_iter_step(&oiter)) {
       // do something with the face
   }
 
another example, iterating over a mapping:
   BMOIter oiter;
   void *key;
   void *val;
 
   key = BMO_iter_new(&oiter, bm, some_operator, "slot_name", 0);
   for (; key; key = BMO_iter_step(&oiter)) {
       val = BMO_iter_map_value(&oiter);
       //do something with the key/val pair
       //note that val is a pointer to the val data,
       //whether it's a float, pointer, whatever.
       //
       // so to get a pointer, for example, use:
       //  *((void **)BMO_iter_map_value(&oiter));
       //or something like that.
   }

◆ BMOpDefine

typedef struct BMOpDefine BMOpDefine

◆ BMOperator

typedef struct BMOperator BMOperator

◆ BMOpSlot

typedef struct BMOpSlot BMOpSlot

◆ BMOSlotType

typedef struct BMOSlotType BMOSlotType

◆ eBMOpSlotSubType_Elem

typedef enum eBMOpSlotSubType_Elem eBMOpSlotSubType_Elem

◆ eBMOpSlotSubType_Int

typedef enum eBMOpSlotSubType_Int eBMOpSlotSubType_Int

◆ eBMOpSlotSubType_Map

typedef enum eBMOpSlotSubType_Map eBMOpSlotSubType_Map

◆ eBMOpSlotSubType_Ptr

typedef enum eBMOpSlotSubType_Ptr eBMOpSlotSubType_Ptr

◆ eBMOpSlotSubType_Union

typedef union eBMOpSlotSubType_Union eBMOpSlotSubType_Union

◆ eBMOpSlotType

typedef enum eBMOpSlotType eBMOpSlotType

Enumeration Type Documentation

◆ anonymous enum

anonymous enum

Enumerator
BMO_FLAG_RESPECT_HIDE

Definition at line 321 of file bmesh_operator_api.h.

◆ anonymous enum

anonymous enum

Enumerator
DEL_VERTS
DEL_EDGES
DEL_ONLYFACES
DEL_EDGESFACES
DEL_FACES
DEL_FACES_KEEP_BOUNDARY
DEL_ONLYTAGGED

Definition at line 403 of file bmesh_operator_api.h.

◆ BMO_Delimit

enum BMO_Delimit

Enumerator
BMO_DELIM_NORMAL
BMO_DELIM_MATERIAL
BMO_DELIM_SEAM
BMO_DELIM_SHARP
BMO_DELIM_UV

Definition at line 425 of file bmesh_operator_api.h.

◆ BMO_SymmDirection

enum BMO_SymmDirection

Enumerator
BMO_SYMMETRIZE_NEGATIVE_X
BMO_SYMMETRIZE_NEGATIVE_Y
BMO_SYMMETRIZE_NEGATIVE_Z
BMO_SYMMETRIZE_POSITIVE_X
BMO_SYMMETRIZE_POSITIVE_Y
BMO_SYMMETRIZE_POSITIVE_Z

Definition at line 415 of file bmesh_operator_api.h.

◆ BMOpTypeFlag

enum BMOpTypeFlag

Enumerator
BMO_OPTYPE_FLAG_NOP
BMO_OPTYPE_FLAG_UNTAN_MULTIRES	Switch from multires tangent space to absolute coordinates.
BMO_OPTYPE_FLAG_NORMALS_CALC
BMO_OPTYPE_FLAG_SELECT_FLUSH
BMO_OPTYPE_FLAG_SELECT_VALIDATE
BMO_OPTYPE_FLAG_INVALIDATE_CLNOR_ALL

Definition at line 301 of file bmesh_operator_api.h.

◆ eBMOpSlotSubType_Elem

enum eBMOpSlotSubType_Elem

Enumerator
BMO_OP_SLOT_SUBTYPE_ELEM_VERT
BMO_OP_SLOT_SUBTYPE_ELEM_EDGE
BMO_OP_SLOT_SUBTYPE_ELEM_FACE
BMO_OP_SLOT_SUBTYPE_ELEM_IS_SINGLE

Definition at line 219 of file bmesh_operator_api.h.

◆ eBMOpSlotSubType_Int

enum eBMOpSlotSubType_Int

Enumerator
BMO_OP_SLOT_SUBTYPE_INT_ENUM
BMO_OP_SLOT_SUBTYPE_INT_FLAG

Definition at line 241 of file bmesh_operator_api.h.

◆ eBMOpSlotSubType_Map

enum eBMOpSlotSubType_Map

Enumerator
BMO_OP_SLOT_SUBTYPE_MAP_EMPTY
BMO_OP_SLOT_SUBTYPE_MAP_ELEM
BMO_OP_SLOT_SUBTYPE_MAP_FLT
BMO_OP_SLOT_SUBTYPE_MAP_INT
BMO_OP_SLOT_SUBTYPE_MAP_BOOL
BMO_OP_SLOT_SUBTYPE_MAP_INTERNAL

Definition at line 226 of file bmesh_operator_api.h.

◆ eBMOpSlotSubType_Ptr

enum eBMOpSlotSubType_Ptr

Enumerator
BMO_OP_SLOT_SUBTYPE_PTR_BMESH
BMO_OP_SLOT_SUBTYPE_PTR_SCENE
BMO_OP_SLOT_SUBTYPE_PTR_OBJECT
BMO_OP_SLOT_SUBTYPE_PTR_MESH
BMO_OP_SLOT_SUBTYPE_PTR_STRUCT

Definition at line 234 of file bmesh_operator_api.h.

◆ eBMOpSlotType

enum eBMOpSlotType

Enumerator
BMO_OP_SLOT_BOOL
BMO_OP_SLOT_INT
BMO_OP_SLOT_FLT
BMO_OP_SLOT_PTR
BMO_OP_SLOT_MAT
BMO_OP_SLOT_VEC
BMO_OP_SLOT_ELEMENT_BUF
BMO_OP_SLOT_MAPPING

Definition at line 197 of file bmesh_operator_api.h.

Function Documentation

◆ _bmo_elem_flag_disable()

BLI_INLINE void _bmo_elem_flag_disable	(	BMesh *	bm,
		BMFlagLayer *	oflags,
		const short	oflag
	)

Definition at line 56 of file bmesh_operator_api_inline.h.

References BLI_assert(), bm, BMFlagLayer::f, oflag, oflags, BMesh::toolflag_index, and BMesh::use_toolflags.

◆ _bmo_elem_flag_enable()

BLI_INLINE void _bmo_elem_flag_enable	(	BMesh *	bm,
		BMFlagLayer *	oflags,
		const short	oflag
	)

Definition at line 49 of file bmesh_operator_api_inline.h.

References BLI_assert(), bm, BMFlagLayer::f, oflag, oflags, BMesh::toolflag_index, and BMesh::use_toolflags.

◆ _bmo_elem_flag_set()

BLI_INLINE void _bmo_elem_flag_set	(	BMesh *	bm,
		BMFlagLayer *	oflags,
		const short	oflag,
		int	val
	)

Definition at line 63 of file bmesh_operator_api_inline.h.

References BLI_assert(), bm, BMFlagLayer::f, oflag, oflags, BMesh::toolflag_index, and BMesh::use_toolflags.

◆ _bmo_elem_flag_test()

BLI_INLINE short _bmo_elem_flag_test	(	BMesh *	bm,
		const BMFlagLayer *	oflags,
		const short	oflag
	)

◆ _bmo_elem_flag_test_bool()

BLI_INLINE bool _bmo_elem_flag_test_bool	(	BMesh *	bm,
		const BMFlagLayer *	oflags,
		const short	oflag
	)

◆ _bmo_elem_flag_toggle()

BLI_INLINE void _bmo_elem_flag_toggle	(	BMesh *	bm,
		BMFlagLayer *	oflags,
		const short	oflag
	)

Definition at line 75 of file bmesh_operator_api_inline.h.

References BLI_assert(), bm, BMFlagLayer::f, oflag, oflags, BMesh::toolflag_index, and BMesh::use_toolflags.

◆ _bmo_slot_buffer_append()

void _bmo_slot_buffer_append	(	BMOpSlot	slot_args_dst[BMO_OP_MAX_SLOTS],
		const char *	slot_name_dst,
		BMOpSlot	slot_args_src[BMO_OP_MAX_SLOTS],
		const char *	slot_name_src,
		struct MemArena *	arena_dst
	)

Copies the values from another slot to the end of the output slot.

Definition at line 1004 of file bmesh_operators.c.

References _bmo_slot_copy(), BLI_assert, BLI_memarena_alloc(), BMO_OP_SLOT_ELEMENT_BUF, BMO_OPSLOT_TYPEINFO, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, BMOpSlot::len, and BMOpSlot::slot_type.

◆ _bmo_slot_copy()

void _bmo_slot_copy	(	BMOpSlot	slot_args_src[BMO_OP_MAX_SLOTS],
		const char *	slot_name_src,
		BMOpSlot	slot_args_dst[BMO_OP_MAX_SLOTS],
		const char *	slot_name_dst,
		struct MemArena *	arena_dst
	)

BMESH OPSTACK COPY SLOT.

define used. Copies data from one slot to another.

Definition at line 287 of file bmesh_operators.c.

References BLI_assert, BLI_ghash_insert(), BLI_ghashIterator_getKey(), BLI_ghashIterator_getValue(), BLI_memarena_alloc(), BM_ALL_NOLOOP, BMO_OP_SLOT_ELEMENT_BUF, BMO_OP_SLOT_MAPPING, BMO_OPSLOT_TYPEINFO, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, eBMOpSlotSubType_Union::elem, BMOpSlot::ghash, GHASH_ITER, BMOpSlot::len, NULL, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by _bmo_slot_buffer_append().

◆ BMO_elem_flag_from_header()

BLI_INLINE BMFlagLayer* BMO_elem_flag_from_header ( BMHeader * ele_head )

Definition at line 71 of file bmesh_operator_api.h.

References BM_EDGE, BM_VERT, and BMHeader::htype.

◆ BMO_iter_map_value_bool()

bool BMO_iter_map_value_bool ( BMOIter * iter )

Definition at line 1556 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_SUBTYPE_MAP_BOOL, eBMOpSlotSubType_Union::map, BMOIter::slot, BMOpSlot::slot_subtype, and BMOIter::val.

◆ BMO_iter_map_value_float()

float BMO_iter_map_value_float ( BMOIter * iter )

Definition at line 1544 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_SUBTYPE_MAP_FLT, eBMOpSlotSubType_Union::map, BMOIter::slot, BMOpSlot::slot_subtype, and BMOIter::val.

◆ BMO_iter_map_value_int()

int BMO_iter_map_value_int ( BMOIter * iter )

Definition at line 1550 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_SUBTYPE_MAP_INT, eBMOpSlotSubType_Union::map, BMOIter::slot, BMOpSlot::slot_subtype, and BMOIter::val.

◆ BMO_iter_map_value_p()

void** BMO_iter_map_value_p ( BMOIter * iter )

Returns a pointer to the key-value when iterating over mappings. remember for pointer maps this will be a pointer to a pointer.

Definition at line 1531 of file bmesh_operators.c.

References BMOIter::val.

◆ BMO_iter_map_value_ptr()

void* BMO_iter_map_value_ptr ( BMOIter * iter )

Definition at line 1536 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_SUBTYPE_MAP_ELEM, BMO_OP_SLOT_SUBTYPE_MAP_INTERNAL, ELEM, eBMOpSlotSubType_Union::map, NULL, BMOIter::slot, BMOpSlot::slot_subtype, and BMOIter::val.

Referenced by bmo_extrude_edge_only_exec(), and bmo_extrude_face_region_exec().

◆ BMO_iter_new()

void* BMO_iter_new	(	BMOIter *	iter,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	restrictmask
	)

New Iterator.

Parameters

restrictmask restricts the iteration to certain element types (e.g. combination of BM_VERT, BM_EDGE, BM_FACE), if iterating over an element buffer (not a mapping).

Definition at line 1454 of file bmesh_operators.c.

References BLI_assert, BLI_ghashIterator_init(), BMO_iter_step(), BMO_OP_SLOT_ELEMENT_BUF, BMO_OP_SLOT_MAPPING, BMO_slot_get(), BMOIter::cur, BMOpSlot::data, eBMOpSlotSubType_Union::elem, BMOpSlot::ghash, BMOIter::giter, BMOIter::restrictmask, BMOIter::slot, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by bmesh_find_doubles_common(), bmo_extrude_edge_only_exec(), bmo_extrude_face_region_exec(), bmo_extrude_vert_indiv_exec(), BMO_iter_as_array(), and BMO_iter_as_arrayN().

◆ BMO_iter_step()

void* BMO_iter_step ( BMOIter * iter )

◆ BMO_mesh_disabled_flag_count()

int BMO_mesh_disabled_flag_count	(	BMesh *	bm,
		const char	htype,
		const short	oflag
	)

Definition at line 616 of file bmesh_operators.c.

References bm, bmo_mesh_flag_count(), and oflag.

Referenced by bmo_slot_buffer_from_flag().

◆ BMO_mesh_enabled_flag_count()

int BMO_mesh_enabled_flag_count	(	BMesh *	bm,
		const char	htype,
		const short	oflag
	)

Definition at line 611 of file bmesh_operators.c.

References bm, bmo_mesh_flag_count(), and oflag.

Referenced by bmo_slot_buffer_from_flag().

◆ BMO_mesh_flag_disable_all()

void BMO_mesh_flag_disable_all	(	BMesh *	bm,
		BMOperator *	op,
		const char	htype,
		const short	oflag
	)

◆ BMO_mesh_selected_remap()

void BMO_mesh_selected_remap	(	BMesh *	bm,
		BMOpSlot *	slot_vert_map,
		BMOpSlot *	slot_edge_map,
		BMOpSlot *	slot_face_map,
		const bool	check_select
	)

Definition at line 649 of file bmesh_operators.c.

References BMesh::act_face, BLI_remlink(), bm, BM_EDGE, BM_elem_flag_test, BM_ELEM_SELECT, BM_VERT, BMEditSelection::ele, ListBase::first, BMEditSelection::htype, MEM_freeN, BMEditSelection::next, NULL, BMesh::selected, and UNLIKELY.

Referenced by bmo_mesh_copy().

◆ BMO_op_callf()

bool BMO_op_callf	(	BMesh *	bm,
		const int	flag,
		const char *	fmt,
			...
	)

Definition at line 2012 of file bmesh_operators.c.

References bm, BMO_op_exec(), BMO_op_finish(), BMO_op_vinitf(), and BMOpError::op.

Referenced by BKE_mesh_mirror_apply_mirror_on_axis(), BKE_mesh_remesh_voxel_fix_poles(), bm_mesh_edge_collapse_flagged(), bmo_collapse_exec(), bmo_create_circle_exec(), bmo_create_cone_exec(), bmo_create_uvsphere_exec(), bmo_dissolve_faces_exec(), bmo_edgenet_fill_exec(), bmo_extrude_discrete_faces_exec(), bmo_holes_fill_exec(), bmo_mirror_exec(), bmo_object_load_bmesh_exec(), bmo_rotate_exec(), bmo_scale_exec(), bmo_spin_exec(), bmo_symmetrize_exec(), bmo_translate_exec(), blender::nodes::create_cube_mesh(), blender::nodes::create_ico_sphere_mesh(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_extrude_repeat_exec(), mesh_separate_tagged(), sculpt_gesture_trim_normals_update(), sculpt_symmetrize_exec(), skin_fix_hole_no_good_verts(), slice_paint_mask(), and unsubdivide_build_base_mesh_from_tags().

◆ BMO_op_exec()

void BMO_op_exec	(	BMesh *	bm,
		BMOperator *	op
	)

BMESH OPSTACK EXEC OP.

Executes a passed in operator.

This handles the allocation and freeing of temporary flag layers and starting/stopping the modeling loop. Can be called from other operators exec callbacks as well.

Definition at line 211 of file bmesh_operators.c.

References bm, BM_mesh_elem_toolflags_ensure(), bmesh_edit_begin(), bmesh_edit_end(), BMO_pop(), BMO_push(), BMOperator::exec, BMesh::toolflag_index, and BMOperator::type_flag.

Referenced by bm_bridge_splice_loops(), BM_mesh_esubdivide(), bm_vert_connect_pair(), bmo_collapse_exec(), bmo_connect_vert_pair_exec(), bmo_contextual_create_exec(), bmo_create_icosphere_exec(), bmo_create_uvsphere_exec(), bmo_edgenet_fill_exec(), bmo_extrude_edge_only_exec(), bmo_extrude_face_region_exec(), bmo_holes_fill_exec(), bmo_mirror_exec(), BMO_op_callf(), bmo_pointmerge_exec(), bmo_remove_doubles_exec(), bmo_solidify_face_region_exec(), bmo_spin_exec(), bmo_split_exec(), bmo_symmetrize_exec(), bmo_triangle_fill_exec(), BPy_BMO_call(), bridge_loop_pair(), build_hull(), collapse_face_corners(), edbm_add_edge_face_exec(), EDBM_automerge(), EDBM_automerge_and_split(), edbm_bevel_calc(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_connect_vert_pair(), edbm_dupli_extrude_cursor_invoke(), edbm_duplicate_exec(), edbm_edge_rotate_selected_exec(), edbm_extrude_discrete_faces(), edbm_extrude_edges_indiv(), edbm_extrude_ex(), edbm_extrude_verts_indiv(), edbm_fill_exec(), edbm_fill_grid_exec(), edbm_inset_calc(), edbm_knife_cut_exec(), edbm_offset_edgeloop_exec(), EDBM_op_call_and_selectf(), EDBM_op_call_silentf(), EDBM_op_callf(), edbm_poke_face_exec(), edbm_quads_convert_to_tris_exec(), edbm_remove_doubles_exec(), edbm_reverse_colors_exec(), edbm_reverse_uvs_exec(), edbm_rotate_colors_exec(), edbm_rotate_uvs_exec(), edbm_screw_exec(), EDBM_select_less(), EDBM_select_more(), edbm_solidify_exec(), edbm_spin_exec(), edbm_split_exec(), edbm_unsubdivide_exec(), edbm_wireframe_exec(), lineart_geometry_object_load(), mesh_bisect_exec(), mesh_symmetrize_exec(), and skin_fix_hole_no_good_verts().

◆ BMO_op_finish()

void BMO_op_finish	(	BMesh *	bm,
		BMOperator *	op
	)

BMESH OPSTACK FINISH OP.

Does housekeeping chores related to finishing up an operator.

Definition at line 235 of file bmesh_operators.c.

References BMOperator::arena, BLI_memarena_free(), bm, BM_ELEM_INDEX_VALIDATE, bmo_op_slots_free(), bmo_opdefines, BMOpDefine::opname, BMOpDefine::slot_types_in, BMOpDefine::slot_types_out, BMOperator::slots_in, BMOperator::slots_out, and BMOperator::type.

Referenced by bm_bridge_splice_loops(), BM_mesh_esubdivide(), bm_vert_connect_pair(), bmo_collapse_exec(), bmo_connect_vert_pair_exec(), bmo_contextual_create_exec(), bmo_create_icosphere_exec(), bmo_create_uvsphere_exec(), bmo_edgenet_fill_exec(), bmo_extrude_edge_only_exec(), bmo_extrude_face_region_exec(), bmo_holes_fill_exec(), bmo_mirror_exec(), BMO_op_callf(), BMO_op_vinitf(), bmo_pointmerge_exec(), bmo_remove_doubles_exec(), bmo_solidify_face_region_exec(), bmo_spin_exec(), bmo_split_exec(), bmo_symmetrize_exec(), bmo_triangle_fill_exec(), BPy_BMO_call(), bridge_loop_pair(), build_hull(), collapse_face_corners(), EDBM_automerge(), EDBM_automerge_and_split(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_extrude_ex(), EDBM_op_finish(), edbm_remove_doubles_exec(), EDBM_select_less(), EDBM_select_more(), lineart_geometry_object_load(), mesh_bisect_exec(), and skin_fix_hole_no_good_verts().

◆ BMO_op_flag_disable()

void BMO_op_flag_disable	(	BMesh *	bm,
		BMOperator *	op,
		const int	op_flag
	)

◆ BMO_op_flag_enable()

void BMO_op_flag_enable	(	BMesh *	bm,
		BMOperator *	op,
		const int	op_flag
	)

◆ BMO_op_init()

void BMO_op_init	(	BMesh *	bm,
		BMOperator *	op,
		const int	flag,
		const char *	opname
	)

BMESH OPSTACK INIT OP.

Initializes an operator structure to a certain type

Definition at line 171 of file bmesh_operators.c.

References BMOperator::arena, BLI_memarena_new(), BLI_MEMARENA_STD_BUFSIZE, BLI_memarena_use_calloc(), bm, BM_ELEM_INDEX_VALIDATE, bmo_op_slots_init(), BMO_opcode_from_opname(), bmo_opdefines, BMOpDefine::exec, BMOperator::exec, BMOperator::flag, BMOperator::slots_in, BMOperator::slots_out, BMOperator::type, BMOperator::type_flag, and BMOpDefine::type_flag.

Referenced by bm_bridge_splice_loops(), bm_vert_connect_pair(), bmo_collapse_exec(), bmo_mirror_exec(), BMO_op_vinitf(), bmo_pointmerge_exec(), bmo_remove_doubles_exec(), bmo_solidify_face_region_exec(), bmo_split_exec(), bmo_symmetrize_exec(), BPy_BMO_call(), EDBM_automerge(), EDBM_automerge_and_split(), edbm_extrude_ex(), lineart_geometry_object_load(), and skin_fix_hole_no_good_verts().

◆ BMO_op_initf()

bool BMO_op_initf	(	BMesh *	bm,
		BMOperator *	op,
		const int	flag,
		const char *	fmt,
			...
	)

◆ BMO_op_vinitf()

bool BMO_op_vinitf	(	BMesh *	bm,
		BMOperator *	op,
		const int	flag,
		const char *	_fmt,
		va_list	vlist
	)

Format Strings for BMOperator Initialization.

This system is used to execute or initialize an operator, using a formatted-string system.

The basic format for the format string is: [operatorname] [slot_name]=%[code] [slot_name]=%[code]

Example:

BMO_op_callf(bm, BMO_FLAG_DEFAULTS,
             "delete context=%i geom=%hv",
             DEL_ONLYFACES, BM_ELEM_SELECT);

Primitive Types

b - boolean (same as int but 1/0 only). BMO_OP_SLOT_BOOL
i - int. BMO_OP_SLOT_INT
f - float. BMO_OP_SLOT_FLT
p - pointer (normally to a Scene/Mesh/Object/BMesh). BMO_OP_SLOT_PTR
m3 - 3x3 matrix of floats. BMO_OP_SLOT_MAT
m4 - 4x4 matrix of floats. BMO_OP_SLOT_MAT
v - 3D vector of floats. BMO_OP_SLOT_VEC Utility

Pass an existing slot which is copied to either an input or output slot. Taking the operator and slot-name pair of args (BMOperator *, const char *).

s - slot_in (lower case)
S - slot_out (upper case) Element Buffer (BMO_OP_SLOT_ELEMENT_BUF)
e - single element vert/edge/face (use with BMO_OP_SLOT_SUBTYPE_ELEM_IS_SINGLE).
eb - elem buffer, take an array and a length.
av - all verts
ae - all edges
af - all faces
hv - header flagged verts (hflag)
he - header flagged edges (hflag)
hf - header flagged faces (hflag)
Hv - header flagged verts (hflag off)
He - header flagged edges (hflag off)
Hf - header flagged faces (hflag off)
fv - flagged verts (oflag)
fe - flagged edges (oflag)
ff - flagged faces (oflag)
Fv - flagged verts (oflag off)
Fe - flagged edges (oflag off)
Ff - flagged faces (oflag off)

Note: The common v/e/f suffix can be mixed, so avef is can be used for all verts, edges and faces. Order is not important so Hfev is also valid (all un-flagged verts, edges and faces).

Definition at line 1737 of file bmesh_operators.c.

References BLI_assert, BLI_strdup(), BLI_strncpy(), bm, BM_EDGE, BM_ELEM_HIDDEN, BM_FACE, BM_VERT, BMO_FLAG_RESPECT_HIDE, bmo_name_to_slotcode_check(), BMO_op_finish(), BMO_op_init(), BMO_opcode_from_opname_check(), BMO_slot_bool_set(), BMO_slot_buffer_from_all(), BMO_slot_buffer_from_array(), BMO_slot_buffer_from_disabled_flag(), BMO_slot_buffer_from_disabled_hflag(), BMO_slot_buffer_from_enabled_flag(), BMO_slot_buffer_from_enabled_hflag(), BMO_slot_buffer_from_single(), BMO_slot_copy, BMO_slot_float_set(), BMO_slot_get(), BMO_slot_int_set(), BMO_slot_mat_set(), BMO_slot_ptr_set(), BMO_slot_vec_set(), Freestyle::c, error(), BMOperator::flag, GOTO_ERROR, MEM_freeN, NEXT_CHAR, BMOpError::op, pos, size(), BMOperator::slots_in, BMOperator::slots_out, state, type, and UNLIKELY.

Referenced by BMO_op_callf(), BMO_op_initf(), EDBM_op_call_and_selectf(), EDBM_op_call_silentf(), EDBM_op_callf(), and EDBM_op_init().

◆ BMO_opcode_from_opname()

int BMO_opcode_from_opname ( const char * opname )

Definition at line 1658 of file bmesh_operators.c.

References bmo_opdefines, bmo_opdefines_total, and STREQ.

Referenced by BMO_op_init(), BMO_opcode_from_opname_check(), bpy_bmesh_op_doc_get(), and bpy_bmesh_ops_module_getattro().

◆ BMO_pop()

void BMO_pop ( BMesh * bm )

BMESH OPSTACK POP.

Pops the opstack one level and frees a flag layer if appropriate

BMESH_TODO: investigate NOT freeing flag layers.

Definition at line 111 of file bmesh_operators.c.

References bm, bmo_flag_layer_free(), and BMesh::toolflag_index.

Referenced by BMO_op_exec(), build_skin(), and walker_deselect_nth().

◆ BMO_push()

void BMO_push	(	BMesh *	bm,
		BMOperator *	op
	)

Referenced by build_skin(), and walker_deselect_nth().

◆ BMO_slot_as_arrayN()

void* BMO_slot_as_arrayN	(	BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		int *	len
	)

Definition at line 530 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, BMOpSlot::len, len, MEM_mallocN, ret, and BMOpSlot::slot_type.

◆ BMO_slot_bool_get()

bool BMO_slot_bool_get	(	BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name
	)

Definition at line 518 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_BOOL, BMO_slot_get(), BMOpSlot::data, BMOpSlot::i, and BMOpSlot::slot_type.

Referenced by bmo_beautify_fill_exec(), bmo_bevel_exec(), bmo_bisect_plane_exec(), bmo_bridge_loops_exec(), bmo_collapse_exec(), bmo_connect_verts_exec(), bmo_contextual_create_exec(), bmo_create_circle_exec(), bmo_create_cone_exec(), bmo_create_cube_exec(), bmo_create_grid_exec(), bmo_create_icosphere_exec(), bmo_create_monkey_exec(), bmo_create_uvsphere_exec(), bmo_dissolve_edges_exec(), bmo_dissolve_faces_exec(), bmo_dissolve_limit_exec(), bmo_dissolve_verts_exec(), bmo_edgeloop_fill_exec(), bmo_edgenet_fill_exec(), bmo_extrude_discrete_faces_exec(), bmo_extrude_edge_only_exec(), bmo_extrude_face_region_exec(), bmo_extrude_vert_indiv_exec(), bmo_face_attribute_fill_exec(), bmo_grid_fill_exec(), bmo_inset_individual_exec(), bmo_inset_region_exec(), bmo_join_triangles_exec(), bmo_mesh_copy(), bmo_mesh_to_bmesh_exec(), bmo_mirror_exec(), bmo_offset_edgeloops_exec(), bmo_poke_exec(), bmo_region_extend_exec(), bmo_reverse_faces_exec(), bmo_rotate_colors_exec(), bmo_rotate_edges_exec(), bmo_rotate_uvs_exec(), bmo_smooth_laplacian_vert_exec(), bmo_smooth_vert_exec(), bmo_spin_exec(), bmo_split_edges_exec(), bmo_split_exec(), bmo_subdivide_edges_exec(), bmo_transform_exec(), bmo_triangle_fill_exec(), and bmo_wireframe_exec().

◆ BMO_slot_bool_set()

void BMO_slot_bool_set	(	BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const bool	i
	)

Definition at line 396 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_BOOL, BMO_slot_get(), BMOpSlot::data, BMOpSlot::i, and BMOpSlot::slot_type.

Referenced by BMO_op_vinitf(), bmo_solidify_face_region_exec(), edbm_extrude_ex(), and edbm_knife_cut_exec().

◆ BMO_slot_buffer_alloc()

void* BMO_slot_buffer_alloc	(	BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const int	len
	)

Definition at line 787 of file bmesh_operators.c.

References BMOperator::arena, BLI_memarena_alloc(), BMO_OP_SLOT_ELEMENT_BUF, BMO_OPSLOT_TYPEINFO, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, BMOpSlot::len, len, NULL, and BMOpSlot::slot_type.

Referenced by bm_vert_connect_pair(), bmo_create_grid_exec(), BMO_slot_buffer_from_all(), bmo_slot_buffer_from_flag(), bmo_slot_buffer_from_hflag(), and bpy_slot_from_py().

◆ BMO_slot_buffer_count()

int BMO_slot_buffer_count	(	BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name
	)

◆ BMO_slot_buffer_flag_disable()

void BMO_slot_buffer_flag_disable	(	BMesh *	bm,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const short	oflag
	)

BMO_FLAG_BUFFER.

Removes flags from elements in a slots buffer

Definition at line 1240 of file bmesh_operators.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BMO_elem_flag_disable, BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, data, eBMOpSlotSubType_Union::elem, BMOpSlot::len, oflag, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

◆ BMO_slot_buffer_flag_enable()

void BMO_slot_buffer_flag_enable	(	BMesh *	bm,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const short	oflag
	)

BMO_FLAG_BUFFER.

Flags elements in a slots buffer

Definition at line 1213 of file bmesh_operators.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BMO_elem_flag_enable, BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_get(), BMOpSlot::data, data, eBMOpSlotSubType_Union::elem, BMOpSlot::len, oflag, BMOpSlot::p, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by bmesh_find_doubles_common(), bmo_bisect_plane_exec(), bmo_bridge_loops_exec(), bmo_collapse_exec(), bmo_collapse_uvs_exec(), bmo_connect_vert_pair_exec(), bmo_connect_verts_exec(), bmo_contextual_create_exec(), bmo_create_icosphere_exec(), bmo_create_uvsphere_exec(), bmo_delete_exec(), bmo_dissolve_degenerate_exec(), bmo_dissolve_edges_exec(), bmo_dissolve_faces_exec(), bmo_duplicate_exec(), bmo_edgenet_prepare_exec(), bmo_extrude_face_region_exec(), bmo_grid_fill_exec(), bmo_mirror_exec(), bmo_recalc_face_normals_exec(), bmo_region_extend_exec(), bmo_solidify_face_region_exec(), bmo_split_exec(), bmo_subdivide_edgering_exec(), bmo_subdivide_edges_exec(), bmo_symmetrize_exec(), bmo_triangle_fill_exec(), and bridge_loop_pair().

◆ BMO_slot_buffer_from_all()

void BMO_slot_buffer_from_all	(	BMesh *	bm,
		BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype
	)

BMO_ALL_TO_SLOT.

Copies all elements of a certain type into an operator slot.

Definition at line 815 of file bmesh_operators.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_FACE, BM_FACES_OF_MESH, BM_ITER_MESH, BM_VERT, BM_VERTS_OF_MESH, BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_buffer_alloc(), BMO_slot_get(), output, BMesh::totedge, BMesh::totface, and BMesh::totvert.

Referenced by BMO_op_vinitf(), and bpy_slot_from_py().

◆ BMO_slot_buffer_from_array()

void BMO_slot_buffer_from_array	(	BMOperator *	op,
		BMOpSlot *	slot,
		BMHeader **	ele_buffer,
		int	ele_buffer_len
	)

Definition at line 975 of file bmesh_operators.c.

References BMOperator::arena, BLI_assert, BLI_memarena_alloc(), BMO_ASSERT_SLOT_IN_OP, BMO_OP_SLOT_ELEMENT_BUF, BMOpSlot::buf, BMOpSlot::data, ELEM, BMOpSlot::len, NULL, and BMOpSlot::slot_type.

Referenced by BMO_op_vinitf().

◆ BMO_slot_buffer_from_disabled_flag()

void BMO_slot_buffer_from_disabled_flag	(	BMesh *	bm,
		BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const short	oflag
	)

Definition at line 1119 of file bmesh_operators.c.

References bm, bmo_slot_buffer_from_flag(), and oflag.

Referenced by BMO_op_vinitf().

◆ BMO_slot_buffer_from_disabled_hflag()

void BMO_slot_buffer_from_disabled_hflag	(	BMesh *	bm,
		BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const char	hflag
	)

Definition at line 951 of file bmesh_operators.c.

References bm, and bmo_slot_buffer_from_hflag().

Referenced by BMO_op_vinitf().

◆ BMO_slot_buffer_from_enabled_flag()

void BMO_slot_buffer_from_enabled_flag	(	BMesh *	bm,
		BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const short	oflag
	)

Definition at line 1109 of file bmesh_operators.c.

References bm, bmo_slot_buffer_from_flag(), and oflag.

Referenced by bmo_beautify_fill_exec(), bmo_bisect_edges_exec(), bmo_bisect_plane_exec(), bmo_bridge_loops_exec(), bmo_connect_verts_concave_exec(), bmo_connect_verts_exec(), bmo_connect_verts_nonplanar_exec(), bmo_contextual_create_exec(), bmo_create_circle_exec(), bmo_create_cone_exec(), bmo_create_cube_exec(), bmo_create_icosphere_exec(), bmo_create_monkey_exec(), bmo_create_uvsphere_exec(), bmo_create_vert_exec(), bmo_dissolve_faces_exec(), bmo_dissolve_limit_exec(), bmo_duplicate_exec(), bmo_edgeloop_fill_exec(), bmo_edgenet_prepare_exec(), bmo_extrude_discrete_faces_exec(), bmo_extrude_edge_only_exec(), bmo_extrude_vert_indiv_exec(), bmo_grid_fill_exec(), bmo_inset_individual_exec(), bmo_inset_region_exec(), bmo_join_triangles_exec(), bmo_mirror_exec(), bmo_offset_edgeloops_exec(), BMO_op_vinitf(), bmo_poke_exec(), bmo_region_extend_exec(), bmo_rotate_edges_exec(), bmo_subdivide_edgering_exec(), bmo_subdivide_edges_exec(), bmo_symmetrize_exec(), bmo_triangle_fill_exec(), and edbm_knife_cut_exec().

◆ BMO_slot_buffer_from_enabled_hflag()

void BMO_slot_buffer_from_enabled_hflag	(	BMesh *	bm,
		BMOperator *	op,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const char	hflag
	)

Definition at line 941 of file bmesh_operators.c.

References bm, and bmo_slot_buffer_from_hflag().

Referenced by bmo_bevel_exec(), bmo_edgenet_fill_exec(), bmo_face_attribute_fill_exec(), bmo_holes_fill_exec(), BMO_op_vinitf(), bmo_split_edges_exec(), bmo_triangulate_exec(), bmo_wireframe_exec(), edbm_extrude_ex(), and edbm_inset_calc().

◆ BMO_slot_buffer_from_single()

void BMO_slot_buffer_from_single	(	BMOperator *	op,
		BMOpSlot *	slot,
		BMHeader *	ele
	)

Definition at line 961 of file bmesh_operators.c.

References BMOperator::arena, BLI_assert, BLI_memarena_alloc(), BMO_ASSERT_SLOT_IN_OP, BMO_OP_SLOT_ELEMENT_BUF, BMO_OP_SLOT_SUBTYPE_ELEM_IS_SINGLE, BMOpSlot::buf, BMOpSlot::data, ELEM, eBMOpSlotSubType_Union::elem, BMHeader::htype, BMOpSlot::len, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by BMO_op_vinitf(), and bpy_slot_from_py().

◆ BMO_slot_buffer_get_first()

void* BMO_slot_buffer_get_first	(	BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name
	)

Definition at line 1437 of file bmesh_operators.c.

References BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, NULL, and BMOpSlot::slot_type.

Referenced by edbm_add_edge_face_exec().

◆ BMO_slot_buffer_get_single()

void* BMO_slot_buffer_get_single ( BMOpSlot * slot )

Definition at line 992 of file bmesh_operators.c.

References BLI_assert, BMO_OP_SLOT_ELEMENT_BUF, BMO_OP_SLOT_SUBTYPE_ELEM_IS_SINGLE, BMOpSlot::buf, BMOpSlot::data, ELEM, eBMOpSlotSubType_Union::elem, BMOpSlot::len, NULL, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by bmo_pointmerge_facedata_exec(), and bpy_slot_to_py().

◆ BMO_slot_buffer_hflag_disable()

void BMO_slot_buffer_hflag_disable	(	BMesh *	bm,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const char	hflag,
		const bool	do_flush
	)

BMO_FLAG_BUFFER.

Removes flags from elements in a slots buffer, automatically using the selection API where appropriate.

Definition at line 1175 of file bmesh_operators.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_elem_flag_disable, BM_ELEM_HIDDEN, BM_elem_hide_set, BM_ELEM_SELECT, BM_elem_select_set(), BMO_OP_SLOT_ELEMENT_BUF, BMO_slot_get(), BMOpSlot::buf, BMOpSlot::data, data, eBMOpSlotSubType_Union::elem, BMOpSlot::len, BMOpSlot::slot_subtype, and BMOpSlot::slot_type.

Referenced by bmo_inset_region_exec(), edbm_add_edge_face_exec(), edbm_edge_rotate_selected_exec(), edbm_extrude_verts_indiv(), EDBM_select_less(), and edbm_solidify_exec().

◆ BMO_slot_buffer_hflag_enable()

void BMO_slot_buffer_hflag_enable	(	BMesh *	bm,
		BMOpSlot	slot_args[BMO_OP_MAX_SLOTS],
		const char *	slot_name,
		const char	htype,
		const char	hflag,
		const bool	do_flush
	)