Classes
struct	BMEditSelection

Macros
#define	BM_elem_hide_set(bm, ele, hide) _bm_elem_hide_set(bm, &(ele)->head, hide)

#define	BM_select_history_check(bm, ele) _bm_select_history_check(bm, &(ele)->head)

#define	BM_select_history_remove(bm, ele) _bm_select_history_remove(bm, &(ele)->head)

#define	BM_select_history_store_notest(bm, ele) _bm_select_history_store_notest(bm, &(ele)->head)

#define	BM_select_history_store(bm, ele) _bm_select_history_store(bm, &(ele)->head)

#define	BM_select_history_store_head_notest(bm, ele) _bm_select_history_store_head_notest(bm, &(ele)->head)

#define	BM_select_history_store_head(bm, ele) _bm_select_history_store_head(bm, &(ele)->head)

#define	BM_select_history_store_after_notest(bm, ese_ref, ele) _bm_select_history_store_after_notest(bm, ese_ref, &(ele)->head)

#define	BM_select_history_store_after(bm, ese, ese_ref) _bm_select_history_store_after(bm, ese_ref, &(ele)->head)

#define	BM_SELECT_HISTORY_BACKUP(bm)

#define	BM_SELECT_HISTORY_RESTORE(bm)

Typedefs
typedef struct BMEditSelection	BMEditSelection

Functions
void	_bm_elem_hide_set (BMesh bm, BMHeader head, const bool hide)

void	BM_vert_hide_set (BMVert *v, const bool hide)

void	BM_edge_hide_set (BMEdge *e, const bool hide)

void	BM_face_hide_set (BMFace *f, const bool hide)

void	BM_elem_select_set (BMesh bm, BMElem ele, const bool select)

void	BM_mesh_elem_hflag_enable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)

void	BM_mesh_elem_hflag_disable_test (BMesh *bm, const char htype, const char hflag, const bool respecthide, const bool overwrite, const char hflag_test)

void	BM_mesh_elem_hflag_enable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)

void	BM_mesh_elem_hflag_disable_all (BMesh *bm, const char htype, const char hflag, const bool respecthide)

void	BM_vert_select_set (BMesh bm, BMVert v, const bool select)
	Select Vert. More...

void	BM_edge_select_set (BMesh bm, BMEdge e, const bool select)
	Select Edge. More...

void	BM_face_select_set (BMesh bm, BMFace f, const bool select)
	Select Face. More...

void	BM_edge_select_set_noflush (BMesh bm, BMEdge e, const bool select)

void	BM_face_select_set_noflush (BMesh bm, BMFace f, const bool select)

void	BM_mesh_select_mode_clean_ex (BMesh *bm, const short selectmode)
	Select Mode Clean. More...

void	BM_mesh_select_mode_clean (BMesh *bm)

void	BM_mesh_select_mode_set (BMesh *bm, int selectmode)

void	BM_mesh_select_mode_flush_ex (BMesh *bm, const short selectmode)
	Select Mode Flush. More...

void	BM_mesh_select_mode_flush (BMesh *bm)

void	BM_mesh_deselect_flush (BMesh *bm)

void	BM_mesh_select_flush (BMesh *bm)

int	BM_mesh_elem_hflag_count_enabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)

int	BM_mesh_elem_hflag_count_disabled (BMesh *bm, const char htype, const char hflag, const bool respecthide)

void	BM_mesh_active_face_set (BMesh bm, BMFace f)

BMFace *	BM_mesh_active_face_get (BMesh *bm, const bool is_sloppy, const bool is_selected)

BMEdge *	BM_mesh_active_edge_get (BMesh *bm)

BMVert *	BM_mesh_active_vert_get (BMesh *bm)

BMElem *	BM_mesh_active_elem_get (BMesh *bm)

void	BM_editselection_center (BMEditSelection *ese, float r_center[3])

void	BM_editselection_normal (BMEditSelection *ese, float r_normal[3])

void	BM_editselection_plane (BMEditSelection *ese, float r_plane[3])

bool	_bm_select_history_check (BMesh bm, const BMHeader ele)

bool	_bm_select_history_remove (BMesh bm, BMHeader ele)

void	_bm_select_history_store_notest (BMesh bm, BMHeader ele)

void	_bm_select_history_store (BMesh bm, BMHeader ele)

void	_bm_select_history_store_head_notest (BMesh bm, BMHeader ele)

void	_bm_select_history_store_head (BMesh bm, BMHeader ele)

void	_bm_select_history_store_after (BMesh bm, BMEditSelection ese_ref, BMHeader *ele)

void	_bm_select_history_store_after_notest (BMesh bm, BMEditSelection ese_ref, BMHeader *ele)

void	BM_select_history_validate (BMesh *bm)

void	BM_select_history_clear (BMesh *bm)

bool	BM_select_history_active_get (BMesh bm, struct BMEditSelection ese)

struct GHash *	BM_select_history_map_create (BMesh *bm)

void	BM_select_history_merge_from_targetmap (BMesh bm, GHash vert_map, GHash edge_map, GHash face_map, const bool use_chain)

Macro Definition Documentation

◆ BM_elem_hide_set

#define BM_elem_hide_set	(	bm,
		ele,
		hide
	)	_bm_elem_hide_set(bm, &(ele)->head, hide)

Definition at line 30 of file bmesh_marking.h.

◆ BM_SELECT_HISTORY_BACKUP

#define BM_SELECT_HISTORY_BACKUP ( bm )

Value:

  { \
    ListBase _bm_prev_selected = (bm)->selected; \
    BLI_listbase_clear(&(bm)->selected)

Definition at line 130 of file bmesh_marking.h.

◆ BM_select_history_check

#define BM_select_history_check	(	bm,
		ele
	)	_bm_select_history_check(bm, &(ele)->head)

Definition at line 101 of file bmesh_marking.h.

◆ BM_select_history_remove

#define BM_select_history_remove	(	bm,
		ele
	)	_bm_select_history_remove(bm, &(ele)->head)

Definition at line 102 of file bmesh_marking.h.

◆ BM_SELECT_HISTORY_RESTORE

#define BM_SELECT_HISTORY_RESTORE ( bm )

Value:

  (bm)->selected = _bm_prev_selected; \
  } \
  (void)0

Definition at line 135 of file bmesh_marking.h.

◆ BM_select_history_store

#define BM_select_history_store	(	bm,
		ele
	)	_bm_select_history_store(bm, &(ele)->head)

Definition at line 104 of file bmesh_marking.h.

◆ BM_select_history_store_after

#define BM_select_history_store_after	(	bm,
		ese,
		ese_ref
	)	_bm_select_history_store_after(bm, ese_ref, &(ele)->head)

Definition at line 110 of file bmesh_marking.h.

◆ BM_select_history_store_after_notest

#define BM_select_history_store_after_notest	(	bm,
		ese_ref,
		ele
	)	_bm_select_history_store_after_notest(bm, ese_ref, &(ele)->head)

Definition at line 108 of file bmesh_marking.h.

◆ BM_select_history_store_head

#define BM_select_history_store_head	(	bm,
		ele
	)	_bm_select_history_store_head(bm, &(ele)->head)

Definition at line 107 of file bmesh_marking.h.

◆ BM_select_history_store_head_notest

#define BM_select_history_store_head_notest	(	bm,
		ele
	)	_bm_select_history_store_head_notest(bm, &(ele)->head)

Definition at line 105 of file bmesh_marking.h.

◆ BM_select_history_store_notest

#define BM_select_history_store_notest	(	bm,
		ele
	)	_bm_select_history_store_notest(bm, &(ele)->head)

Definition at line 103 of file bmesh_marking.h.

Typedef Documentation

◆ BMEditSelection

typedef struct BMEditSelection BMEditSelection

Function Documentation

◆ _bm_elem_hide_set()

void _bm_elem_hide_set	(	BMesh *	bm,
		BMHeader *	head,
		const bool	hide
	)

Definition at line 1394 of file bmesh_marking.c.

References bm, BM_EDGE, BM_edge_hide_set(), BM_edge_select_set(), BM_FACE, BM_face_hide_set(), BM_face_select_set(), BM_VERT, BM_vert_hide_set(), BM_vert_select_set(), BMESH_ASSERT, and BMHeader::htype.

◆ _bm_select_history_check()

bool _bm_select_history_check	(	BMesh *	bm,
		const BMHeader *	ele
	)

Definition at line 946 of file bmesh_marking.c.

References BLI_findptr(), bm, NULL, and BMesh::selected.

◆ _bm_select_history_remove()

bool _bm_select_history_remove	(	BMesh *	bm,
		BMHeader *	ele
	)

Definition at line 951 of file bmesh_marking.c.

References BLI_findptr(), BLI_freelinkN(), bm, and BMesh::selected.

◆ _bm_select_history_store()

void _bm_select_history_store	(	BMesh *	bm,
		BMHeader *	ele
	)

Definition at line 973 of file bmesh_marking.c.

References bm, BM_select_history_check, and BM_select_history_store_notest.

◆ _bm_select_history_store_after()

void _bm_select_history_store_after	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele
	)

Definition at line 993 of file bmesh_marking.c.

References bm, BM_select_history_check, and BM_select_history_store_after_notest.

◆ _bm_select_history_store_after_notest()

void _bm_select_history_store_after_notest	(	BMesh *	bm,
		BMEditSelection *	ese_ref,
		BMHeader *	ele
	)

Definition at line 987 of file bmesh_marking.c.

References BLI_insertlinkafter(), bm, bm_select_history_create(), and BMesh::selected.

◆ _bm_select_history_store_head()

void _bm_select_history_store_head	(	BMesh *	bm,
		BMHeader *	ele
	)

Definition at line 980 of file bmesh_marking.c.

References bm, BM_select_history_check, and BM_select_history_store_head_notest.

◆ _bm_select_history_store_head_notest()

void _bm_select_history_store_head_notest	(	BMesh *	bm,
		BMHeader *	ele
	)

Definition at line 967 of file bmesh_marking.c.

References BLI_addhead(), bm, bm_select_history_create(), and BMesh::selected.

◆ _bm_select_history_store_notest()

void _bm_select_history_store_notest	(	BMesh *	bm,
		BMHeader *	ele
	)

Definition at line 961 of file bmesh_marking.c.

References BLI_addtail(), bm, bm_select_history_create(), and BMesh::selected.

◆ BM_edge_hide_set()

void BM_edge_hide_set	(	BMEdge *	e,
		const bool	hide
	)

Definition at line 1330 of file bmesh_marking.c.

References BLI_assert, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, BMLoop::f, BMVert::head, BMHeader::htype, BMLoop::radial_next, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

◆ BM_edge_select_set()

void BM_edge_select_set	(	BMesh *	bm,
		BMEdge *	e,
		const bool	select
	)

Select Edge.

Changes selection state of a single edge in a mesh.

Definition at line 423 of file bmesh_marking.c.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), e, BMVert::head, BMHeader::htype, SCE_SELECT_VERTEX, select(), BMesh::selectmode, BMesh::totedgesel, and v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), BM_face_select_set(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_clean_ex(), BM_mesh_select_mode_set(), bm_vert_connect_select_history(), do_lasso_select_mesh__doSelectEdge_pass0(), do_lasso_select_mesh__doSelectEdge_pass1(), do_mesh_box_select__doSelectEdge_pass0(), do_mesh_box_select__doSelectEdge_pass1(), edbm_add_edge_face_exec__tricky_extend_sel(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_edges(), edbm_intersect_select(), edbm_polybuild_transform_at_cursor_invoke(), edbm_region_to_loop_exec(), edbm_rip_edge_invoke(), edbm_ripsel_deselect_helper(), edbm_select_linked_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), edbm_select_non_manifold_exec(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_sharp_edges_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), edgering_select(), edgetag_set_cb(), knife_make_cuts(), knife_make_face_cuts(), mesh_circle_doSelectEdge(), mouse_mesh_shortest_path_edge(), similar_edge_select_exec(), uvedit_edge_select_disable(), and uvedit_edge_select_enable().

◆ BM_edge_select_set_noflush()

void BM_edge_select_set_noflush	(	BMesh *	bm,
		BMEdge *	e,
		const bool	select
	)

Definition at line 548 of file bmesh_marking.c.

References BLI_assert, bm, BM_EDGE, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, e, BMVert::head, BMHeader::htype, select(), and BMesh::totedgesel.

Referenced by BM_face_select_set().

◆ BM_editselection_center()

void BM_editselection_center	(	BMEditSelection *	ese,
		float	r_center[3]
	)

Generic way to get data from an EditSelection type These functions were written to be used by the Modifier widget when in Rotate about active mode, but can be used anywhere.

Definition at line 831 of file bmesh_marking.c.

References BM_EDGE, BM_FACE, BM_face_calc_center_median(), BM_VERT, BMVert::co, copy_v3_v3(), BMEditSelection::ele, BMEditSelection::htype, mid_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by BM_editselection_plane(), ED_object_calc_active_center_for_editmode(), transform_convert_mesh_islands_calc(), and uv_map_transform_center().

◆ BM_editselection_normal()

void BM_editselection_normal	(	BMEditSelection *	ese,
		float	r_normal[3]
	)

Definition at line 847 of file bmesh_marking.c.

References add_v3_v3v3(), BM_EDGE, BM_FACE, BM_VERT, BMVert::co, copy_v3_v3(), cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, BMVert::no, BMFace::no, normalize_v3(), sub_v3_v3v3(), BMEdge::v1, and BMEdge::v2.

Referenced by getTransformOrientation_ex(), and transform_convert_mesh_islands_calc().

◆ BM_editselection_plane()

void BM_editselection_plane	(	BMEditSelection *	ese,
		float	r_plane[3]
	)

Calculate a plane that is right angles to the edge/vert/faces normal also make the plane run along an axis that is related to the geometry, because this is used for the gizmos Y axis.

Definition at line 880 of file bmesh_marking.c.

References BM_editselection_center(), BM_VERT, cross_v3_v3v3(), BMEditSelection::ele, BMEditSelection::htype, normalize_v3(), BMEditSelection::prev, and sub_v3_v3v3().

Referenced by getTransformOrientation_ex(), and transform_convert_mesh_islands_calc().

◆ BM_elem_select_set()

void BM_elem_select_set	(	BMesh *	bm,
		BMElem *	ele,
		const bool	select
	)

Note: use BM_elem_flag_test(ele, BM_ELEM_SELECT) to test selection; by design, this will not touch the editselection history stuff

Definition at line 719 of file bmesh_marking.c.

References BLI_assert, bm, BM_EDGE, BM_edge_select_set(), BM_FACE, BM_face_select_set(), BM_VERT, BM_vert_select_set(), BMElem::head, BMHeader::htype, and select().

Referenced by BM_elem_attrs_copy_ex(), BM_elem_select_copy(), BM_mesh_elem_hflag_disable_test(), BM_mesh_elem_hflag_enable_test(), BMO_slot_buffer_hflag_disable(), BMO_slot_buffer_hflag_enable(), bpy_bm_elem_hflag_set(), bpy_bm_elem_select_set(), edbm_extrude_ex(), EDBM_mesh_reveal(), walker_deselect_nth(), and walker_select().

◆ BM_face_hide_set()

void BM_face_hide_set	(	BMFace *	f,
		const bool	hide
	)

Definition at line 1359 of file bmesh_marking.c.

References BLI_assert, BM_elem_flag_disable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, BMLoop::e, edge_flush_hide_set(), BMFace::head, BMHeader::htype, BMLoop::next, BMLoop::v, and vert_flush_hide_set().

Referenced by _bm_elem_hide_set().

◆ BM_face_select_set()

void BM_face_select_set	(	BMesh *	bm,
		BMFace *	f,
		const bool	select
	)

Select Face.

Changes selection state of a single face in a mesh.

Note: This allows a temporarily invalid state - where for eg an edge bay be de-selected, but an adjacent face remains selected.

Rely on BM_mesh_select_mode_flush to correct these cases.

Note: flushing based on mode, see T46494; use BM_edge_select_set_noflush, vertex flushing is handled last.

Definition at line 469 of file bmesh_marking.c.

References BLI_assert, bm, bm_edge_is_face_select_any_other(), BM_edge_select_set(), BM_edge_select_set_noflush(), BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACE_FIRST_LOOP, bm_vert_is_edge_select_any_other(), BM_vert_select_set(), BMLoop::e, BMFace::head, BMHeader::htype, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_VERTEX, select(), BMesh::selectmode, BMesh::totfacesel, and BMLoop::v.

Referenced by _bm_elem_hide_set(), BM_elem_select_set(), bm_face_split_by_edges(), bm_face_split_by_edges_island_connect(), BM_mesh_bm_from_me(), BM_mesh_select_mode_set(), do_lasso_select_mesh__doSelectFace(), do_mesh_box_select__doSelectFace(), edbm_add_edge_face_exec__tricky_finalize_sel(), edbm_backbuf_check_and_select_faces(), EDBM_deselect_by_material(), edbm_extrude_discrete_faces(), edbm_loop_to_region_exec(), edbm_mod_weighted_strength_exec(), edbm_polybuild_transform_at_cursor_invoke(), edbm_select_face_by_sides_exec(), EDBM_select_interior_faces(), edbm_select_linked_exec(), edbm_select_linked_flat_faces_exec(), edbm_select_linked_pick_ex(), edbm_select_loose_exec(), EDBM_select_mirrored(), EDBM_select_pick(), edbm_select_random_exec(), edbm_select_similar_region_exec(), EDBM_select_swap(), EDBM_selectmode_convert(), EDBM_selectmode_set(), facetag_set_cb(), fmap_select(), mesh_circle_doSelectFace(), similar_face_select_exec(), uv_hide_exec(), uvedit_edge_select_disable(), uvedit_edge_select_enable(), uvedit_face_select_disable(), uvedit_face_select_enable(), uvedit_uv_select_disable(), and uvedit_uv_select_enable().

◆ BM_face_select_set_noflush()

void BM_face_select_set_noflush	(	BMesh *	bm,
		BMFace *	f,
		const bool	select
	)

Definition at line 570 of file bmesh_marking.c.

References BLI_assert, bm, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BMFace::head, BMHeader::htype, select(), and BMesh::totfacesel.

◆ BM_mesh_active_edge_get()

BMEdge* BM_mesh_active_edge_get ( BMesh * bm )

Definition at line 783 of file bmesh_marking.c.

References bm, BM_EDGE, BMEditSelection::ele, BMEditSelection::htype, ListBase::last, NULL, and BMesh::selected.

Referenced by BM_mesh_region_match(), mesh_render_data_create(), and uv_shortest_path_pick_invoke().

◆ BM_mesh_active_elem_get()

BMElem* BM_mesh_active_elem_get ( BMesh * bm )

Definition at line 809 of file bmesh_marking.c.

References bm, BMEditSelection::ele, ListBase::last, NULL, and BMesh::selected.

Referenced by deselect_nth_active(), edbm_elem_active_elem_or_face_get(), and edbm_preselect_or_active().

◆ BM_mesh_active_face_get()

BMFace* BM_mesh_active_face_get	(	BMesh *	bm,
		const bool	is_sloppy,
		const bool	is_selected
	)

Definition at line 743 of file bmesh_marking.c.

References BMesh::act_face, bm, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE, BM_FACES_OF_MESH, BM_ITER_MESH, BMEditSelection::ele, BMEditSelection::htype, if(), ListBase::last, NULL, BMEditSelection::prev, and BMesh::selected.

Referenced by BM_select_history_active_get(), deselect_nth_active(), ED_space_image_auto_set(), ED_uvedit_get_aspect(), EDBM_uv_active_face_get(), mesh_render_data_create(), uv_shortest_path_pick_exec(), and uv_shortest_path_pick_invoke().

◆ BM_mesh_active_face_set()

void BM_mesh_active_face_set	(	BMesh *	bm,
		BMFace *	f
	)

Definition at line 738 of file bmesh_marking.c.

References BMesh::act_face, and bm.

Referenced by EDBM_select_pick(), mouse_mesh_loop(), mouse_mesh_shortest_path_face(), mouse_mesh_uv_shortest_path_face(), and uv_mouse_select_multi().

◆ BM_mesh_active_vert_get()

BMVert* BM_mesh_active_vert_get ( BMesh * bm )

Definition at line 796 of file bmesh_marking.c.

References bm, BM_VERT, BMEditSelection::ele, BMEditSelection::htype, ListBase::last, NULL, and BMesh::selected.

Referenced by ED_mesh_active_dvert_get_em(), edbm_fill_grid_prepare(), edbm_select_axis_exec(), getTransformOrientation_ex(), mesh_render_data_create(), and uv_shortest_path_pick_invoke().

◆ BM_mesh_deselect_flush()

void BM_mesh_deselect_flush ( BMesh * bm )

mode independent flushing up/down

Definition at line 314 of file bmesh_marking.c.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_ITER_MESH, BM_select_history_validate(), e, BMLoop::f, BMLoop::radial_next, and recount_totsels().

Referenced by bpy_bmesh_select_flush(), EDBM_deselect_flush(), and EDBM_selectmode_convert().

◆ BM_mesh_elem_hflag_count_disabled()

int BM_mesh_elem_hflag_count_disabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide
	)

Definition at line 707 of file bmesh_marking.c.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

◆ BM_mesh_elem_hflag_count_enabled()

int BM_mesh_elem_hflag_count_enabled	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide
	)

Definition at line 699 of file bmesh_marking.c.

References bm, and bm_mesh_flag_count().

Referenced by bmo_slot_buffer_from_hflag().

◆ BM_mesh_elem_hflag_disable_all()

void BM_mesh_elem_hflag_disable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide
	)

Definition at line 1266 of file bmesh_marking.c.

References bm, and BM_mesh_elem_hflag_disable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_bisect_plane(), BM_mesh_calc_edge_groups_as_arrays(), BM_mesh_esubdivide(), BM_mesh_intersect(), BM_mesh_region_match(), BM_mesh_wireframe(), bmo_bevel_exec(), bmo_bisect_plane_exec(), bmo_edgenet_fill_exec(), bmo_face_attribute_fill_exec(), bmo_holes_fill_exec(), bmo_inset_individual_exec(), bmo_inset_region_exec(), bmo_offset_edgeloops_exec(), bmo_split_edges_exec(), bmo_subdivide_edgering_exec(), bmo_triangulate_exec(), bmo_wireframe_exec(), bridge_loop_pair(), build_hull(), do_lasso_select_mesh_uv(), ED_vgroup_mirror(), edbm_bridge_edge_loops_for_single_editmesh(), edbm_bridge_tag_boundary_edges(), edbm_delete_edgeloop_exec(), edbm_delete_loose_exec(), EDBM_flag_disable_all(), edbm_intersect_select(), edbm_loop_to_region_exec(), edbm_offset_edgeloop_exec(), EDBM_op_call_and_selectf(), edbm_region_to_loop_exec(), edbm_select_linked_flat_faces_exec(), edbm_split_exec(), edbm_wireframe_exec(), geometry_extract_apply(), geometry_extract_tag_face_set(), geometry_extract_tag_masked_faces(), hull_merge_triangles(), knifeproject_exec(), lineart_geometry_object_load(), mesh_separate_loose(), mesh_separate_material(), mesh_separate_selected(), mesh_separate_tagged(), mesh_symmetry_snap_exec(), multires_unsubdivide_prepare_original_bmesh_for_extract(), multires_unsubdivide_single_level(), sculpt_face_set_delete_geometry(), sculpt_gesture_trim_normals_update(), sculpt_symmetrize_exec(), skin_fix_hole_no_good_verts(), skin_smooth_hulls(), slice_paint_mask(), smart_uv_project_calculate_project_normals(), special_aftertrans_update__mesh(), unsubdivide_build_base_mesh_from_tags(), uv_box_select_exec(), uv_circle_select_exec(), uv_select_edgering(), uv_select_flush_from_tag_face(), uv_select_flush_from_tag_loop(), uv_select_more_less(), uv_select_overlap(), and uv_weld_align().

◆ BM_mesh_elem_hflag_disable_test()

void BM_mesh_elem_hflag_disable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test
	)

Definition at line 1144 of file bmesh_marking.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_select_history_clear(), BM_VERT, BM_VERTS_OF_MESH, NULL, BMesh::totedgesel, BMesh::totfacesel, BMesh::totvertsel, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_disable_all().

◆ BM_mesh_elem_hflag_enable_all()

void BM_mesh_elem_hflag_enable_all	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide
	)

Definition at line 1275 of file bmesh_marking.c.

References bm, and BM_mesh_elem_hflag_enable_test().

Referenced by BKE_mesh_remesh_voxel_fix_poles(), BM_mesh_calc_path_region_edge(), BM_mesh_calc_path_region_face(), BM_mesh_calc_path_uv_region_face(), BM_mesh_edgesplit(), BM_mesh_separate_faces(), bmo_inset_region_exec(), EDBM_flag_enable_all(), EDBM_mesh_knife(), sculpt_gesture_trim_normals_update(), slice_paint_mask(), and unsubdivide_build_base_mesh_from_tags().

◆ BM_mesh_elem_hflag_enable_test()

void BM_mesh_elem_hflag_enable_test	(	BMesh *	bm,
		const char	htype,
		const char	hflag,
		const bool	respecthide,
		const bool	overwrite,
		const char	hflag_test
	)

Definition at line 1212 of file bmesh_marking.c.

References BLI_assert, bm, BM_ALL_NOLOOP, BM_EDGE, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_elem_select_set(), BM_FACE, BM_FACES_OF_MESH, BM_iter_new, BM_VERT, BM_VERTS_OF_MESH, NULL, and UNLIKELY.

Referenced by BM_mesh_elem_hflag_enable_all(), edbm_delete_edgeloop_exec(), edbm_edge_rotate_selected_exec(), edbm_remove_doubles_exec(), knifeproject_exec(), mesh_separate_selected(), and uv_reveal_exec().

◆ BM_mesh_select_flush()

void BM_mesh_select_flush ( BMesh * bm )

mode independent flushing up/down

Definition at line 349 of file bmesh_marking.c.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_enable, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, e, BMLoop::next, recount_totsels(), and BMLoop::v.

Referenced by BM_mesh_esubdivide(), bpy_bmesh_select_flush(), and EDBM_select_flush().

◆ BM_mesh_select_mode_clean()

void BM_mesh_select_mode_clean ( BMesh * bm )

Definition at line 229 of file bmesh_marking.c.

References bm, BM_mesh_select_mode_clean_ex(), and BMesh::selectmode.

Referenced by EDBM_select_less().

◆ BM_mesh_select_mode_clean_ex()

void BM_mesh_select_mode_clean_ex	(	BMesh *	bm,
		const short	selectmode
	)

Select Mode Clean.

Remove isolated selected elements when in a mode doesn't support them. eg: in edge-mode a selected vertex must be connected to a selected edge.

Note: this could be made a part of BM_mesh_select_mode_flush_ex

Definition at line 169 of file bmesh_marking.c.

References bm, BM_edge_select_set(), BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_test, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, BM_vert_select_set(), BM_VERTS_OF_MESH, BMLoop::e, e, BMLoop::next, SCE_SELECT_EDGE, SCE_SELECT_FACE, SCE_SELECT_VERTEX, BMesh::totedgesel, BMesh::totfacesel, BMesh::totvertsel, and v.

Referenced by BM_mesh_select_mode_clean(), and edbm_rip_invoke__edge().

◆ BM_mesh_select_mode_flush()

void BM_mesh_select_mode_flush ( BMesh * bm )

Definition at line 306 of file bmesh_marking.c.

References bm, BM_mesh_select_mode_flush_ex(), and BMesh::selectmode.

Referenced by BM_mesh_select_mode_set(), bmesh_edit_end(), bpy_bmesh_select_flush_mode(), edbm_rip_edge_invoke(), and knifeproject_exec().

◆ BM_mesh_select_mode_flush_ex()

void BM_mesh_select_mode_flush_ex	(	BMesh *	bm,
		const short	selectmode
	)

Select Mode Flush.

Makes sure to flush selections 'upwards' (ie: all verts of an edge selects the edge and so on). This should only be called by system and not tool authors.

Definition at line 241 of file bmesh_marking.c.

References bm, BM_EDGES_OF_MESH, BM_elem_flag_disable, BM_elem_flag_enable, BM_elem_flag_set, BM_elem_flag_test, BM_ELEM_HIDDEN, BM_ELEM_SELECT, BM_FACE_FIRST_LOOP, BM_FACES_OF_MESH, BM_ITER_MESH, BM_select_history_validate(), BMLoop::e, e, BMLoop::next, recount_totsels(), SCE_SELECT_EDGE, SCE_SELECT_VERTEX, and BMLoop::v.