# Makefile.in generated by automake 1.11.6 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/emdros
pkgincludedir = $(includedir)/emdros
pkglibdir = $(libdir)/emdros
pkglibexecdir = $(libexecdir)/emdros
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i586-alt-linux-gnu
host_triplet = i586-alt-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/emdros-config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/missing --run aclocal-1.11
ADDITIONAL_CFLAGS = 
ADDITIONAL_CXXFLAGS = 
AMTAR = $${TAR-tar}
AR = ar
ARFLAGS = cru
AUTOCONF = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/missing --run autoconf
AUTOHEADER = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/missing --run autoheader
AUTOMAKE = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/missing --run automake-1.11
AWK = gawk
BACKENDLDADD =  -L/usr/lib -lpq -L/usr/lib -lmysqlclient -lsqlite3
BIG_ENDIAN = 0
BISON = 
CC = i586-alt-linux-gcc
CCDEPMODE = depmode=none
CFLAGS = -pipe -Wall -g -O2 -march=i586 -mtune=generic -I/usr/include/pcre  
CHARACTERISTIC_BACKEND_STRING = _sq3_pg_my
CPP = i586-alt-linux-gcc -E
CPPFLAGS =  -I/usr/include/pgsql -I/usr/include/mysql
CSC = no
CXX = i586-alt-linux-g++
CXXCPP = i586-alt-linux-g++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -pipe -Wall -g -O2 -march=i586 -mtune=generic -I/usr/include/pcre  
CYGPATH_W = echo
DARWIN_CXXFLAGS = 
DARWIN_LDFLAGS = 
DEBUGFLAG = 
DEFAULT_BACKEND_ENUM = kSQLite3
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EMDFDB_BACKEND = 
EMDFDEPS = ../EMdF/libemdf.la 
EMDFDEPSSWIG = ../../EMdF/libemdf.la 
EMDFLDADD = ../EMdF/libemdf.la  -L/usr/lib -lpq -L/usr/lib -lmysqlclient -lsqlite3 
EMDFLDADDSWIG = ../../EMdF/libemdf.la  -L/usr/lib -lpq -L/usr/lib -lmysqlclient -lsqlite3
ENABLE_DEBUG = --disable-debug
ENABLE_SHARED = --enable-shared=yes
ENCODING = UTF8
EXEEXT = 
FGREP = /bin/grep -F
FLEX = 
FLEXLEXER = 
GMCS = no
GREP = /bin/grep
HAVE_ISTREAM = 1
HAVE_ISTREAM_H = 
HAVE_OSTREAM = 1
HAVE_OSTREAM_H = 
INMEMORYDB = 1
INSTALL = /bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JAR = /usr/bin/jar
JAVA = 
JAVAC = /usr/bin/javac
JDK_INCLUDES = 
JDK_LIB = 
LD = /usr/bin/ld
LDFLAGS = 
LIBOBJS = 
LIBS = -lcurses 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIB_EMDF_AGE = 0
LIB_EMDF_CURRENT = 4
LIB_EMDF_REVISION = 0
LIB_MQL_AGE = 0
LIB_MQL_CURRENT = 3
LIB_MQL_REVISION = 0
LIB_SWIG_AGE = 0
LIB_SWIG_CURRENT = 4
LIB_SWIG_REVISION = 0
LINUX = 1
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MACCPU = 
MAKEINFO = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/missing --run makeinfo
MANIFEST_TOOL = :
MCS = no
MKDIR_P = /bin/mkdir -p
MONO = no
MONOCOMPILER = no
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OS_UNIX = 1
OS_WIN = 0
OTOOL = 
OTOOL64 = 
PACKAGE = emdros
PACKAGE_BUGREPORT = 
PACKAGE_NAME = emdros
PACKAGE_STRING = emdros 3.1.1
PACKAGE_TARNAME = emdros
PACKAGE_URL = 
PACKAGE_VERSION = 3.1.1
PATH_SEPARATOR = :
PCRE_CFLAGS = -I/usr/include/pcre  
PCRE_DEP = -lpcre  
PCRE_DEP_SWIG = -lpcre  
PCRE_LIBADD = -lpcre  
PCRE_LIBADD_SWIG = -lpcre  
PCRE_LIBS = -lpcre  
PERL = 
PERL_INCLUDES = 
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
PROGRAMLDADD = 
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_INCLUDES =  -I/usr/include/python2.7
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_SITE_PACKAGES_DIR = /usr/lib/python2.7/site-packages
PYTHON_VERSION = 2.7
RANLIB = ranlib
RUBY = 
RUBY_INCLUDES = 
RUBY_SO_DIR = 
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
SQLITE2_DEP = 
SQLITE2_DEP_SWIG = 
SQLITE2_LDADD = 
SQLITE2_LDADD_SWIG = 
SQLITE3_DEP = 
SQLITE3_DEP_SWIG = 
SQLITE3_LDADD = -lsqlite3
SQLITE3_LDADD_SWIG = -lsqlite3
SQLITE3_VERSION = 
STRIP = strip
SUN = 0
SUN_CXXFLAGS = 
SUN_LDFLAGS = 
SWIG_EXTRA_LIBS = 
SWIG_WITH_CSHARP_WRAPPERS = 
SWIG_WITH_JAVA_WRAPPERS = 
SWIG_WITH_PERL_WRAPPERS = 
SWIG_WITH_PYTHON_WRAPPERS = 
SWIG_WITH_RUBY_WRAPPERS = 
TARGET_HAVE_READLINE = 0
TARGET_READLINE_INC = 
TARGET_READLINE_LIBS = -lcurses 
TARGET_TCL_INC = -DNO_TCL=1
TARGET_TCL_LIBS = -ldl -lm -ldl -lm -lpthread
TEMP_STORE = 2
USE_MYSQL = 1
USE_POSTGRESQL = 1
USE_SQLITE2 = 0
USE_SQLITE3 = 1
VERSION = 3.1.1
WITH_MYSQL = --with-mysql=maybe
WITH_POSTGRESQL = --with-postgresql=maybe
WITH_SQLITE2 = --with-sqlite=no
WITH_SQLITE3 = --with-sqlite3=system
WITH_SWIG_CSHARP = 
WITH_SWIG_JAVA = --with-swig-language-java=maybe
WITH_SWIG_PERL = --with-swig-language-perl=no
WITH_SWIG_PYTHON = --with-swig-language-python=yes
WITH_SWIG_RUBY = --with-swig-language-ruby=no
WITH_WXWIDGETS = --with-wx=maybe
WITH_WX_PROGRAMS = 
WX_CONFIG_PROG = /usr/bin/wx-config
WX_NONUNICODE_CXXFLAGS = 
WX_NONUNICODE_LDFLAGS = 
WX_NONUNICODE_LIBS = 
WX_REZFLAGS = 
WX_UNICODE_CXXFLAGS = -I/usr/lib/wx/include/gtk2-unicode-release-2.8 -I/usr/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -D__WXGTK__ -pthread
WX_UNICODE_LDFLAGS = 
WX_UNICODE_LIBS = -pthread   -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 
abs_builddir = /usr/src/RPM/BUILD/emdros-3.1.1/doc
abs_srcdir = /usr/src/RPM/BUILD/emdros-3.1.1/doc
abs_top_builddir = /usr/src/RPM/BUILD/emdros-3.1.1
abs_top_srcdir = /usr/src/RPM/BUILD/emdros-3.1.1
ac_ct_AR = ar
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = /usr/bin
build = i586-alt-linux-gnu
build_alias = i586-alt-linux
build_cpu = i586
build_os = linux-gnu
build_vendor = alt
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = i586-alt-linux-gnu
host_alias = i586-alt-linux
host_cpu = i586
host_os = linux-gnu
host_vendor = alt
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /usr/src/RPM/BUILD/emdros-3.1.1/install-sh
libdir = /usr/lib
libexecdir = /usr/lib
localedir = ${datarootdir}/locale
localstatedir = /var/lib
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/emdros
pkgpythondir = ${pythondir}/emdros
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python2.7/site-packages
pythondir = ${prefix}/lib/python2.7/site-packages
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
SUBDIRS = progref
man_MANS = emdros.1 \
           mql.1 mqldump.1 manage_indices.1 upgrade_db.1 \
           emdftry.1 mqltry.1 mqllingtry.1 jsontry.1 renderobjects.1 \
           hal_build_db.1 mqlhal.1 eqtc.1 eqt.1 eqtu.1 agexport.1 \
           ubimport.1 pennimport.1 negraimport.1 tigerxmlimport.1 \
           plaintextimport.1 slashedtextimport.1 sfmimport.1

man_html = $(man_MANS:.1=.html)
LYXFILES = Monad-Sets.lyx \
           MQL-Programmers-Guide.lyx MQL-Query-Guide.lyx \
           New-EMdF.lyx Rel-EMdF.lyx Standard-MdF.lyx

PDFFILES = $(LYXFILES:.lyx=.pdf)
TXTFILES = bootstrapping.txt HOW-TO-USE.txt MQL-README.txt \
           README-doc.txt ChangeLog-doc.txt NEWS-doc.txt 

WIN32FILES = README.MySQL.Win32.txt 
EXTRA_DIST = index.html $(TXTFILES) $(WIN32FILES) \
             $(man_MANS) $(man_html) mqlhal.1.in eqtc.1.in \
             eqt.1.in eqtu.1.in $(LYXFILES) $(PDFFILES) \
             TheDoor.fig TheDoor.eps

CLEANFILES = *~ core 
DISTCLEANFILES = $(PDFFILES) TheDoor.eps \
             $(man_html) mqlhal.1 eqtc.1 \
             eqt.1 eqtu.1  eqtu.1.in 

BUILT_SOURCES = mqlhal.1 eqtc.1 eqt.1 eqtu.1 eqtu.1 TheDoor.eps $(PDFFILES)
MACDOCDISTDIR = $(MACDISTDIR)/doc
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html-am:

info: info-recursive

info-am:

install-data-am: install-man

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-man

uninstall-man: uninstall-man1

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-man \
	uninstall-man1


TheDoor.eps: TheDoor.fig
	fig2dev -L eps TheDoor.fig TheDoor.eps

Monad-Sets.pdf : Monad-Sets.lyx
	lyx -e pdf Monad-Sets.lyx

MQL-Query-subset.pdf: MQL-Query-subset.lyx TheDoor.eps
	lyx -e pdf MQL-Query-subset.lyx

MQL-Programmers-Guide.pdf: MQL-Programmers-Guide.lyx  TheDoor.eps
	lyx -e pdf MQL-Programmers-Guide.lyx

MQL-Query-Guide.pdf: MQL-Query-Guide.lyx  TheDoor.eps
	lyx -e pdf MQL-Query-Guide.lyx

New-EMdF.pdf: New-EMdF.lyx
	lyx -e pdf New-EMdF.lyx

Rel-EMdF.pdf: Rel-EMdF.lyx
	lyx -e pdf Rel-EMdF.lyx

Standard-MdF.pdf: Standard-MdF.lyx  TheDoor.eps
	lyx -e pdf Standard-MdF.lyx

mqlhal.1: mqlhal.1.in
	$(top_builddir)/config.status --file=$(srcdir)/mqlhal.1

eqtc.1: eqtc.1.in
	$(top_builddir)/config.status --file=$(srcdir)/eqtc.1

eqt.1: eqt.1.in
	$(top_builddir)/config.status --file=$(srcdir)/eqt.1

eqtu.1.in: eqt.1.in
	cp eqt.1.in eqtu.1.in

eqtu.1: eqtu.1.in
	$(top_builddir)/config.status --file=$(srcdir)/eqtu.1

%.html: %.1
	man2html $< | tail -n +2 > $@

html: $(man_html)

macdist: all html
	cp $(PDFFILES) $(MACDOCDISTDIR)/PDF
	cp $(TXTFILES) $(MACDOCDISTDIR)/txt
	cp $(man_html) $(MACDOCDISTDIR)/html
	cp $(man_MANS) $(MACDISTDIR)/development/man/1
	cd progref ; make macdist MACDISTDIR=../$(MACDISTDIR) ; cd ..

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
