BRepFeat_MakeRevol Class Reference

Describes functions to build revolved shells from basis shapes.

#include <BRepFeat_MakeRevol.hxx>

Inheritance diagram for BRepFeat_MakeRevol:

Public Member Functions
DEFINE_STANDARD_ALLOC	BRepFeat_MakeRevol ()
	initializes the revolved shell class.
	BRepFeat_MakeRevol (const TopoDS_Shape &Sbase, const TopoDS_Shape &Pbase, const TopoDS_Face &Skface, const gp_Ax1 &Axis, const Standard_Integer Fuse, const Standard_Boolean Modify)
	a face Pbase is selected in the shape Sbase to serve as the basis for the revolved shell. The revolution will be defined by the axis Axis and Fuse offers a choice between:
void	Init (const TopoDS_Shape &Sbase, const TopoDS_Shape &Pbase, const TopoDS_Face &Skface, const gp_Ax1 &Axis, const Standard_Integer Fuse, const Standard_Boolean Modify)
void	Add (const TopoDS_Edge &E, const TopoDS_Face &OnFace)
	Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape.
void	Perform (const Standard_Real Angle)
void	Perform (const TopoDS_Shape &Until)
void	Perform (const TopoDS_Shape &From, const TopoDS_Shape &Until)
	Reconstructs the feature topologically.
void	PerformThruAll ()
	Builds an infinite shell. The infinite descendants will not be kept in the result.
void	PerformUntilAngle (const TopoDS_Shape &Until, const Standard_Real Angle)
	Assigns both a limiting shape, Until from TopoDS_Shape, and an angle, Angle at which to stop generation of the revolved shell feature.
void	Curves (TColGeom_SequenceOfCurve &S)
Handle_Geom_Curve	BarycCurve ()

---

Constructor & Destructor Documentation

DEFINE_STANDARD_ALLOC BRepFeat_MakeRevol::BRepFeat_MakeRevol

(

)

BRepFeat_MakeRevol::BRepFeat_MakeRevol	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Shape &	Pbase,
		const TopoDS_Face &	Skface,
		const gp_Ax1 &	Axis,
		const Standard_Integer	Fuse,
		const Standard_Boolean	Modify
	)

• removing matter with a Boolean cut using the setting 0
  
• adding matter with Boolean fusion using the setting 1.
  The sketch face Skface serves to determine
  the type of operation. If it is inside the basis
  shape, a local operation such as glueing can be performed.
  

---

Member Function Documentation

void BRepFeat_MakeRevol::Add	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	OnFace
	)

Handle_Geom_Curve BRepFeat_MakeRevol::BarycCurve

(

)

[virtual]

Implements BRepFeat_Form.

void BRepFeat_MakeRevol::Curves

(

TColGeom_SequenceOfCurve &

S

)

[virtual]

Implements BRepFeat_Form.

void BRepFeat_MakeRevol::Init	(	const TopoDS_Shape &	Sbase,
		const TopoDS_Shape &	Pbase,
		const TopoDS_Face &	Skface,
		const gp_Ax1 &	Axis,
		const Standard_Integer	Fuse,
		const Standard_Boolean	Modify
	)

void BRepFeat_MakeRevol::Perform

(

const Standard_Real

Angle

)

void BRepFeat_MakeRevol::Perform

(

const TopoDS_Shape &

Until

)

void BRepFeat_MakeRevol::Perform	(	const TopoDS_Shape &	From,
		const TopoDS_Shape &	Until
	)

void BRepFeat_MakeRevol::PerformThruAll

(

)

void BRepFeat_MakeRevol::PerformUntilAngle	(	const TopoDS_Shape &	Until,
		const Standard_Real	Angle
	)

---

The documentation for this class was generated from the following file:

• BRepFeat_MakeRevol.hxx