# Makefile.in generated by automake 1.10 from Makefile.am.
# doc/C/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# This file is part of pybliographer
# 
# Copyright (C) 1998-2004 Frederic GOBRY
# Email : gobry@pybliographer.org
# 	   
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2 
# of the License, or (at your option) any later version.
#   
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details. 
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
# 

#
# No modifications of this Makefile should be necessary.
#
# To use this template:
#     1) Define: figdir, docname, lang, omffile, and entities in
#        your Makefile.am file for each document directory,
#        although figdir, omffile, and entities may be empty
#     2) Make sure the Makefile in (1) also includes 
#	 "include $(top_srcdir)/xmldocs.make" and
#	 "dist-hook: app-dist-hook".
#     3) Optionally define 'entities' to hold xml entities which
#        you would also like installed
#     4) Figures must go under $(figdir)/ and be in PNG format
#     5) You should only have one document per directory 
#     6) Note that the figure directory, $(figdir)/, should not have its
#        own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
#   figdir = figures
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   entities = fdl.xml
#   include $(top_srcdir)/xmldocs.make
#   dist-hook: app-dist-hook
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper 
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/
#	Version: 0.1.2 (last updated: March 20, 2002)
#

# 
# No modifications of this Makefile should be necessary.
#
# This file contains the build instructions for installing OMF files.  It is
# generally called from the makefiles for particular formats of documentation.
#
# Note that you must configure your package with --localstatedir=/var/lib
# so that the scrollkeeper-update command below will update the database
# in the standard scrollkeeper directory.
#
# If it is impossible to configure with --localstatedir=/var/lib, then
# modify the definition of scrollkeeper_localstate_dir so that
# it points to the correct location. Note that you must still use 
# $(localstatedir) in this or when people build RPMs it will update
# the real database on their system instead of the one under RPM_BUILD_ROOT.
#
# Note: This make file is not incorporated into xmldocs.make because, in
#       general, there will be other documents install besides XML documents
#       and the makefiles for these formats should also include this file.
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/	
# 	Version: 0.1.2 (last updated: March 20, 2002)
#

pkgdatadir = $(datadir)/pyblio
pkglibdir = $(libdir)/pyblio
pkgincludedir = $(includedir)/pyblio
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/omf.make $(top_srcdir)/xmldocs.make
subdir = doc/C
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run aclocal-1.10
AMTAR = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run tar
AUTOCONF = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run autoconf
AUTOHEADER = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run autoheader
AUTOMAKE = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run automake-1.10
AWK = gawk
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pyblio\" -DVERSION=\"1.3.4\"
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EXTENSION = -1.3
INSTALL = /bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LIBOBJS = 
LIBS = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /usr/src/RPM/BUILD/pyblio-1.3.4/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
PACKAGE = pyblio
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
Python = /usr/bin/python
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VERSION = 1.3.4
abs_builddir = /usr/src/RPM/BUILD/pyblio-1.3.4/doc/C
abs_srcdir = /usr/src/RPM/BUILD/pyblio-1.3.4/doc/C
abs_top_builddir = /usr/src/RPM/BUILD/pyblio-1.3.4
abs_top_srcdir = /usr/src/RPM/BUILD/pyblio-1.3.4
am__leading_dot = .
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build_alias = i586-alt-linux
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share

# ************* Begin of section some packagers may need to modify  **************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
# docdir = $(datadir)/pyblio/doc/$(docname)/$(lang)
docdir = $(datadir)/gnome/help/$(docname)/$(lang)
dvidir = ${docdir}
exec_prefix = /usr
host_alias = i586-alt-linux
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = $(SHELL) /usr/src/RPM/BUILD/pyblio-1.3.4/install-sh
libdir = /usr/lib
libexecdir = /usr/lib
localedir = ${datarootdir}/locale
localstatedir = /var/lib
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /usr/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_builddir = ../..
top_srcdir = ../..

# Standard Gnome boilerplate for doc installation
figdir = figures
docname = pyblio
lang = C
omffile = pyblio-C.omf
entities = \
	legal.xml authors.xml commandline.xml 		\
	config.xml gui.xml preface.xml 			\
	script.xml start.xml styles.xml


# **************  You should not have to edit below this line  *******************
xml_files = $(entities) $(docname).xml
EXTRA_DIST = $(xml_files) $(omffile)
CLEANFILES = omf_timestamp
omf_dest_dir = $(datadir)/omf/pyblio
scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/xmldocs.make $(top_srcdir)/omf.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/C/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/C/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local

.MAKE: install-am install-data-am install-strip

.PHONY: all all-am check check-am clean clean-generic dist-hook \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-data-hook install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local


omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
	done
	touch omf_timestamp

install-data-hook-omf:
	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
	for file in $(omffile); do \
		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
	done
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir)

uninstall-local-omf:
	-for file in $(srcdir)/*.omf; do \
		basefile=`basename $$file`; \
		rm -f $(omf_dest_dir)/$$basefile; \
	done
	-rmdir $(omf_dest_dir)
	-scrollkeeper-update -p $(scrollkeeper_localstate_dir)

# If the following file is in a subdir (like help/) you need to add that to the path

all: omf

$(docname).xml: $(entities)
	-ourdir=`pwd`;  \
	cd $(srcdir);   \
	cp $(entities) $$ourdir

app-dist-hook:
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(distdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-local: omf
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	for file in $(xml_files); do \
	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
	done
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-hook: install-data-hook-omf

uninstall-local: uninstall-local-doc uninstall-local-omf

uninstall-local-doc:
	-if test "$(figdir)"; then \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    rm -f $(docdir)/$(figdir)/$$basefile; \
	  done; \
	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
	fi
	-for file in $(xml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)

dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
