Connect
Disconnect
Setup GPRS Easy Connect
Exit
Select the type of your handset\n(Setup menu)
Important
After the starting...
Select the port
OK/Save Data
Setup GPRS Easy Connect***
Error (GPRS Easy Connect)
After the successfull connection...
Start this browser\nafter the successfull connection:
Turn this function on.
Iconify the connection window.
Important (GPRS Easy Connect)
Automatic connection.
Can't find the configuration file!\nCheck your setting!
Remove of statistics data
Connecting in progress...
Error in connection
The connection is blocked by***\nprocess using the resource.
The connection is interrupted due to dialing\ntime limit.Please reset yout handset.
Perhaps you did not switch on your mobile,\ndid you?
Successful connection!
Successful connection.\nYour local IP address: ***\nYour remote IP adress: ***\nPrimary DNS server: ***\nSecondary DNS server: ***
Connection interrupted.\nNo network answer!
Total data downloaded with "***"
Total data uploaded with "***"
Total data transmitted
Bytes downloaded
Bytes uploaded
Packets downloaded
Packets uploaded
The average speed of the active connection
Duration of active connection
Duration of total connections
Speed of current download
Speed of current upload
Connection interrupted.\nThe GPRS network is overloaded.
Connection interrupted due to\nconfiguration error.\n(Probably your selected port isn't right,\nor it's permission is denied!)
Connection interrupted by user.\nFlat battery.\nData cable failure.
Connection interrupted.
Special statistics (GPRS Easy Connect)
Without supplement of data
With supplement of data
Lines
Columns
Average speed of the active connection per 5 minutes.\nAnd average of those.
Show/hide the statistics window.
Diagram
Connecting process failed\nfor outer error.\nYou should reset your phone.\n(Probably your selected port isn't right.)
hour
Select your language!
Time to left untill re-connect:
Re-connect
Cancel
Can't find suitable net protocoll\nNo usable GPRS service!
Iconify the GPRS Easy Connect
You can't run more than one of\nGPRS Easy Connect!
Choose your provider!
No file named apn!
User:
Password:
Read the important information! (Under "Other" menu.)
Could not find the setup file!\nCheck your settings!
You're not authorized for use the pppd!\nRead the FAQ or imortant information!
Made by
Missing setup parameters!
No phone selected!!
No port selected!
Unsupported language!
No provider selected!
Select the type of your handset
Obligatory parameters
Optional parameters
Time interval of watching the connection (ms)
Is the dynamic DNS allowed?
Rare parameters in use
Default
Setting of provider's own CID
Other
Close this window
Begining of the data's save
Missing configurating parameters!\nCheck your settings!
For the static DNS\nyou must be root!
Ask your privider!
History
Disable the bell signals
Re-connect in the backround
Error
Too many reconnects happend!\nYou should reset your phone.
OK
How many attempts are allowed for reconnect?
Disable the CGQ commands.
Last setup chance if the connecting process fails.\nSome distributions needs it (e.g: RedHat).
Some providers needs this special parameter.\nYou should ask about it your provider!
Mostly you must to fill it in.\nIt's your provider's own parameter\nYou should ask about it your provider!
It should be your provider's generally parameter or your individual code.\nAsk your provider!
If you would like to use static DNS.

In some cases this can offer a more stable connection.
After the successfull connection the selected\nbrowser will automaticly starts.\nIf that isn't on you computer then\nthe GPRS Easy Connect will close!
If the "reconnect" option is active\n then GPRS Easy Connect will reconnect in the backround.\nYou will be seeing a countdown on your panel during reconnect.

You can give an other calling number.
Some providers need they own calling number.\nAsk about it your provider.
If you don't see your phone in the supperted phones list, try to select a similar phone.\nProbably it will work. In this case, please, inform us!
Transmitted data
Transmitted data in last 7 days
Limit monitoring
Date of erase
Max. mounthly data transmission (GB)
Max. weekly data transmission (MB)
If these option is active, then the program will\nautomaticly erase the data transmission counter on the selected day.\n(If the transmitted data quantity will be reached\nthe 90% of limits, then the program will remind you!)
If the weekly limit is defined then the\nprogram will remind you when your transmitted\ndata quantity approaches that!
You have used your mounthly limit's 90% up!
You have used your weakly limit's 90% up!
Options of erase
Reset mounthly transmitted data
Reset weakly transmitted data
Reset the "5 minutes" data
Reset the time counter
There's no echo from connecting progress.\nThere're a lot of cases of it! (Try to reset your phone\nor reconfig your settings!)
The program tries to kill a frozen process. One moment please...
Settings for professionals
Disable self-authentication.
Setting of the pppd script
Do not require the peer to authenticate itself. This option requires root privilege.\n(Usually it needs by using Debian.)
Debug mode on
The ~./gprsec/conn.log file will be made in a debug mode.\nIf your connect will not build up then please send us this file in your "Bugreport"!
Enable BCD Compress
Request that the peer compress packets that it sends, using the BSD-Compress scheme and agree to compress packets sent to the peer.\nIt's a real time comression function for data transmission!\nWARNING! IF YOU USE IT YOUR CONNECTION WILL BE ALWAYS SENDING AND RECIVING DATA FROM/TO THE SERVER\nEVEN THERE'S NO VALID DATA TRANSMISSION.\n(It's useful if you want to down(up)load a larger file. Don't forget about your limit(s) if you have that(those) using this funtion!\nSo you should turn off this function after the down(up)load!\nNote: While this funtion is active the conn.log file will be growing countinuously.)
The provider's APN (Access Point Name)
If the program has known the selected provider's APN,\nthen these will be shown in the next entry cell, if not, then the user has to give this name.\nBy the CDMA system networks no need to give the APN.
Phone hasn't tested yet!
Couldn't find the\nthe selected port!
Search newer version!
You can check, is there a newer version of\nGPRS Easy Connect on our site!\n(If you have refreshed in this way your program yet,\nthen the older will be erased!)
Stop the download!
Searching...
Couldn't connect to server!
There is no newer version on the server!
Resolving nameserver...
Couldn't find the nameserver!
Connecting to the easyconnect.linuxuser.hu is successfull.
HTTP request sent, waiting for answer...
The downloading is in progress...\nTotal size: *** KB
The program is downloaded.\nThe name of program is:\n***
Speed of the connection
Disable watching of data-transmission.
If this option is active, then the program won't\nbe watching the data transmissions!\n(It is usefull if you have a very slow winchester!)
It seems like you've connected successfully\nan "officially" non-tested phone!\nIf you would like to be our main tester, please fill this form up!:
Your name?
Your e-mail address?
Your distribution (with the version number)?
Other notice?
Thanks, but do not disturb me with this in the future!
Data transmission is successfull!
You didn't give your name!
You didn't give your e-mail!
You didn't give the name of your distribution!
Expert port scan
Add/Remove username
New username?
New password?
Select a user-password pair!
Remove the username!
If this option is active, then the port scan\nalgorythm will show all of your possibility connection ports!\n(Otherwise only the first eight found ports.)
You can add/remove user(name)s access of GPRS connection.\n(This option is needed only under FreeBSD and privileged for root.)
Add/remove usernames for GPRS EC
Add username
Remove username
This DNS number will not be used if you are not root!\nAsk the system administrator to set your DNS(s)\nin the /etc/resolf.conf file!
You can not set the DNS(s) as dynamic under FreeBSD!
There's a frozen pppd process!\nMay I try to kill this frozen process now?
Donate the GPRS Easy Connect team!
If you like this program and you would like to help our work, please donate to us.
What we would like to get:
Our sponsors:
Yes, I offer the following thing(s):
Your IP address:
Send the intention of the donate!
You didn't give us all needed data!
Couldn't write into the server's database.\nPlease try it again.
If you have selected one or more items above from the list of claimed things.\nand filled the name nad the e-mail entries,\n\nthen we will contact with you via e-mail after you send these informations!\n\nPlease be sure your aim is serious!
There's no "/etc/ppp/options" file!\nAsk the root to make it. (It should be empty.)
There's no set nameserver in the /etc/resolv.conf file.\nAsk the root to set at least one .\n(The best choice is your GPRS provider's DNS(s),\nbut you can add others too, if that is possible!)
Compact mode
The Main window seems in a compact mode.\nUntil this function is active, the settings are not availabe.
In the Compact mode you can not change the settings.\nIf you want to turn off this mode,\njust click here.
