#
# Section UserX Comments 
#
# In the following User sections, users should configure usernames, passwords, 
# and access rights for IPMI over LAN communication. Usernames can be set to any 
# string with the exception of User1, which is a fixed to the "anonymous" 
# username in IPMI. 
#
# For IPMI over LAN access for a username, set "Enable_User" to "Yes", 
# "Lan_Enable_IPMI_Msgs" to "Yes", and "Lan_Privilege_Limit" to a privilege 
# level. The privilege level is used to limit various IPMI operations for 
# individual usernames. It is recommened that atleast one username be created 
# with a privilege limit "Administrator", so all system functions are available 
# to atleast one username via IPMI over LAN. For security reasons, we recommend 
# not enabling the "anonymous" User1. For most users, "Lan_Session_Limit" can be 
# set to 0 (or ignored) to support an unlimited number of simultaneous IPMI over 
# LAN sessions. 
#
# If your system supports IPMI 2.0 and Serial-over-LAN (SOL), 
# a"SOL_Payload_Access" field may be listed below. Set the "SOL_Payload_Access" 
# field to "Yes" or "No" to enable or disable this username's ability to access 
# SOL. 
#
# Please do not forget to uncomment those fields, such as "Password", that may 
# be commented out during the checkout. 
#
# Some motherboards may require a "Username" to be configured prior to other 
# fields being read/written. If this is the case, those fields will be set to 
# <username-not-set-yet>. 
#
Section User1
	## Give Username
	## Username                                   NULL
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   Yes
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          Yes
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           Administrator
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User2
	## Give Username
	Username                                      admin
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   Yes
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          Yes
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           Administrator
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User3
	## Give Username
	Username                                      admin3
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User4
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User5
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User6
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User7
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User8
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User9
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User10
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User11
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
Section User12
	## Give Username
	Username                                      (Empty User)
	## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
	## Password                                   
	## Possible values: Yes/No or blank to not set
	Enable_User                                   No
	## Possible values: Yes/No
	Lan_Enable_IPMI_Msgs                          No
	## Possible values: Yes/No
	Lan_Enable_Link_Auth                          No
	## Possible values: Yes/No
	Lan_Enable_Restricted_to_Callback             No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
	Lan_Privilege_Limit                           No_Access
	## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
	## Lan_Session_Limit                          
EndSection
#
# Section Lan_Channel Comments 
#
# In the Lan_Channel section, general IPMI over LAN can be enabled for disabled. 
# In the below, "Volatile" configurations are immediately configured onto the 
# BMC and will have immediate effect on the system. "Non_Volatile" 
# configurations are only available after the next system reset. Generally, both 
# the "Volatile" and "Non_Volatile" equivalent fields should be configured 
# identically. 
#
# To enable IPMI over LAN, typically "Access_Mode" should be set to 
# "Always_Available". "Channel_Privilege_Limit" should be set to the highest 
# privilege level any username was configured with. Typically, this is set to 
# "Administrator". 
#
# "User_Level_Auth" and "Per_Message_Auth" are typically set to "Yes" for 
# additional security. 
#
Section Lan_Channel
	## Possible values: Disabled/Pre_Boot_Only/Always_Available/Shared
	Volatile_Access_Mode                          Always_Available
	## Possible values: Yes/No
	Volatile_Enable_User_Level_Auth               Yes
	## Possible values: Yes/No
	Volatile_Enable_Per_Message_Auth              No
	## Possible values: Yes/No
	Volatile_Enable_Pef_Alerting                  No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary
	Volatile_Channel_Privilege_Limit              Administrator
	## Possible values: Disabled/Pre_Boot_Only/Always_Available/Shared
	Non_Volatile_Access_Mode                      Always_Available
	## Possible values: Yes/No
	Non_Volatile_Enable_User_Level_Auth           Yes
	## Possible values: Yes/No
	Non_Volatile_Enable_Per_Message_Auth          No
	## Possible values: Yes/No
	Non_Volatile_Enable_Pef_Alerting              No
	## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary
	Non_Volatile_Channel_Privilege_Limit          Administrator
EndSection
#
# Section Lan_Conf Comments 
#
# In the Lan_Conf section, typical networking configuration is setup. Most users 
# will choose to set "Static" for the "IP_Address_Source" and set the 
# appropriate "IP_Address", "MAC_Address", "Subnet_Mask", etc. for the machine. 
#
Section Lan_Conf
	## Possible values: Unspecified/Static/Use_DHCP/Use_BIOS/Use_Others
	IP_Address_Source                             Use_DHCP
	## Give valid IP address
	IP_Address                                    192.168.1.24
	## Give valid MAC address
	MAC_Address                                   00:17:A4:49:AB:70
	## Give valid Subnet Mask
	Subnet_Mask                                   255.255.255.0
	## Give valid IP address
	Default_Gateway_IP_Address                    192.168.1.1
EndSection
#
# Section Lan_Conf_Auth Comments 
#
# In the Lan_Conf_Auth section, allowable authentication mechanisms for IPMI 1.5 
# is configured. Most users will want to set all "MD5" authentication to "Yes" 
# and the rest to "No". If you have configured a NULL username and a NULL 
# password, you will also want to configure some of the "None" fields to "Yes" 
# to allow "None" authentication to work. Some motherboards do not allow you to 
# enable OEM authentication, so you may wish to set all OEM related fields to 
# "No". 
#
Section Lan_Conf_Auth
