hash_md5.cc

Go to the documentation of this file.

/* SPDX-FileCopyrightText: 1995 Free Software Foundation, Inc.
 *
 * SPDX-License-Identifier: GPL-2.0-or-later
 * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>. */

 
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <sys/types.h>
 
#include "BLI_hash_md5.hh" /* own include */
 
#if defined HAVE_LIMITS_H || defined _LIBC
#  include <limits.h>
#endif
 
/* The following contortions are an attempt to use the C preprocessor to determine an unsigned
 * integral type that is 32 bits wide.
 * An alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but doing that would require
 * that the configure script compile and *run* the resulting executable.
 * Locally running cross-compiled executables is usually not possible.
 */
 
#if defined __STDC__ && __STDC__
#  define UINT_MAX_32_BITS 4294967295U
#else
#  define UINT_MAX_32_BITS 0xFFFFFFFF
#endif
 
/* If UINT_MAX isn't defined, assume it's a 32-bit type.
 * This should be valid for all systems GNU cares about
 * because that doesn't include 16-bit systems, and only modern systems
 * (that certainly have <limits.h>) have 64+-bit integral types.
 */
 
#ifndef UINT_MAX
#  define UINT_MAX UINT_MAX_32_BITS
#endif
 
#if UINT_MAX == UINT_MAX_32_BITS
using md5_uint32 = uint;
#else
#  if USHRT_MAX == UINT_MAX_32_BITS
using md5_uint32 = unsigned short;
#  else
#    if ULONG_MAX == UINT_MAX_32_BITS
using md5_uint32 = unsigned long;
#    else
/* The following line is intended to evoke an error. Using #error is not portable enough. */
"Cannot determine unsigned 32-bit data type."
#    endif
#  endif
#endif
 
/* Following code is low level, upon which are built up the functions
 * #BLI_hash_md5_stream and #BLI_hash_md5_buffer. */
 
/* Structure to save state of computation between the single steps. */
struct md5_ctx {
  md5_uint32 A;
  md5_uint32 B;
  md5_uint32 C;
  md5_uint32 D;
};
 
#ifdef __BIG_ENDIAN__
#  define SWAP(n) (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
#else
#  define SWAP(n) (n)
#endif
 
/* This array contains the bytes used to pad the buffer to the next 64-byte boundary.
 * (RFC 1321, 3.1: Step 1) */
static const uchar fillbuf[64] = {0x80, 0 /* , 0, 0, ... */};

static void md5_init_ctx(md5_ctx *ctx)
{
  ctx->A = 0x67452301;
  ctx->B = 0xefcdab89;
  ctx->C = 0x98badcfe;
  ctx->D = 0x10325476;
}

static void md5_process_block(const void *buffer, size_t len, md5_ctx *ctx)
{
/* These are the four functions used in the four steps of the MD5 algorithm and defined in the
 * RFC 1321. The first function is a little bit optimized
 * (as found in Colin Plumbs public domain implementation).
 */
// #define FF(b, c, d) ((b & c) | (~b & d))
#define FF(b, c, d) (d ^ (b & (c ^ d)))
#define FG(b, c, d) FF(d, b, c)
#define FH(b, c, d) (b ^ c ^ d)
#define FI(b, c, d) (c ^ (b | ~d))
 
/* It is unfortunate that C does not provide an operator for cyclic rotation.
 * Hope the C compiler is smart enough. */
#define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
 
  md5_uint32 correct_words[16];
  const md5_uint32 *words = static_cast<const md5_uint32 *>(buffer);
  size_t nwords = len / sizeof(md5_uint32);
  const md5_uint32 *endp = words + nwords;
  md5_uint32 A = ctx->A;
  md5_uint32 B = ctx->B;
  md5_uint32 C = ctx->C;
  md5_uint32 D = ctx->D;
 
  /* Process all bytes in the buffer with 64 bytes in each round of the loop. */
  while (words < endp) {
    md5_uint32 *cwp = correct_words;
    md5_uint32 A_save = A;
    md5_uint32 B_save = B;
    md5_uint32 C_save = C;
    md5_uint32 D_save = D;
 
    /* First round: using the given function, the context and a constant the next context is
     * computed. Because the algorithms processing unit is a 32-bit word and it is determined
     * to work on words in little endian byte order we perhaps have to change the byte order
     * before the computation. To reduce the work for the next steps we store the swapped words
     * in the array CORRECT_WORDS.
     */
#define OP(a, b, c, d, s, T) \
  a += FF(b, c, d) + (*cwp++ = SWAP(*words)) + T; \
  words++; \
  CYCLIC(a, s); \
  a += b; \
  (void)0
 
    /* Before we start, one word to the strange constants. They are defined in RFC 1321 as:
     *     `T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64`
     */
 
    /* Round 1. */
    OP(A, B, C, D, 7, 0xd76aa478);
    OP(D, A, B, C, 12, 0xe8c7b756);
    OP(C, D, A, B, 17, 0x242070db);
    OP(B, C, D, A, 22, 0xc1bdceee);
    OP(A, B, C, D, 7, 0xf57c0faf);
    OP(D, A, B, C, 12, 0x4787c62a);
    OP(C, D, A, B, 17, 0xa8304613);
    OP(B, C, D, A, 22, 0xfd469501);
    OP(A, B, C, D, 7, 0x698098d8);
    OP(D, A, B, C, 12, 0x8b44f7af);
    OP(C, D, A, B, 17, 0xffff5bb1);
    OP(B, C, D, A, 22, 0x895cd7be);
    OP(A, B, C, D, 7, 0x6b901122);
    OP(D, A, B, C, 12, 0xfd987193);
    OP(C, D, A, B, 17, 0xa679438e);
    OP(B, C, D, A, 22, 0x49b40821);
 
#undef OP
 
    /* For the second to fourth round we have the possibly swapped words in CORRECT_WORDS.
     * Redefine the macro to take an additional first argument specifying the function to use.
     */
#define OP(f, a, b, c, d, k, s, T) \
  a += f(b, c, d) + correct_words[k] + T; \
  CYCLIC(a, s); \
  a += b; \
  (void)0
 
    /* Round 2. */
    OP(FG, A, B, C, D, 1, 5, 0xf61e2562);
    OP(FG, D, A, B, C, 6, 9, 0xc040b340);
    OP(FG, C, D, A, B, 11, 14, 0x265e5a51);
    OP(FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
    OP(FG, A, B, C, D, 5, 5, 0xd62f105d);
    OP(FG, D, A, B, C, 10, 9, 0x02441453);
    OP(FG, C, D, A, B, 15, 14, 0xd8a1e681);
    OP(FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
    OP(FG, A, B, C, D, 9, 5, 0x21e1cde6);
    OP(FG, D, A, B, C, 14, 9, 0xc33707d6);
    OP(FG, C, D, A, B, 3, 14, 0xf4d50d87);
    OP(FG, B, C, D, A, 8, 20, 0x455a14ed);
    OP(FG, A, B, C, D, 13, 5, 0xa9e3e905);
    OP(FG, D, A, B, C, 2, 9, 0xfcefa3f8);
    OP(FG, C, D, A, B, 7, 14, 0x676f02d9);
    OP(FG, B, C, D, A, 12, 20, 0x8d2a4c8a);
 
    /* Round 3. */
    OP(FH, A, B, C, D, 5, 4, 0xfffa3942);
    OP(FH, D, A, B, C, 8, 11, 0x8771f681);
    OP(FH, C, D, A, B, 11, 16, 0x6d9d6122);
    OP(FH, B, C, D, A, 14, 23, 0xfde5380c);
    OP(FH, A, B, C, D, 1, 4, 0xa4beea44);
    OP(FH, D, A, B, C, 4, 11, 0x4bdecfa9);
    OP(FH, C, D, A, B, 7, 16, 0xf6bb4b60);
    OP(FH, B, C, D, A, 10, 23, 0xbebfbc70);
    OP(FH, A, B, C, D, 13, 4, 0x289b7ec6);
    OP(FH, D, A, B, C, 0, 11, 0xeaa127fa);
    OP(FH, C, D, A, B, 3, 16, 0xd4ef3085);
    OP(FH, B, C, D, A, 6, 23, 0x04881d05);
    OP(FH, A, B, C, D, 9, 4, 0xd9d4d039);
    OP(FH, D, A, B, C, 12, 11, 0xe6db99e5);
    OP(FH, C, D, A, B, 15, 16, 0x1fa27cf8);
    OP(FH, B, C, D, A, 2, 23, 0xc4ac5665);
 
    /* Round 4. */
    OP(FI, A, B, C, D, 0, 6, 0xf4292244);
    OP(FI, D, A, B, C, 7, 10, 0x432aff97);
    OP(FI, C, D, A, B, 14, 15, 0xab9423a7);
    OP(FI, B, C, D, A, 5, 21, 0xfc93a039);
    OP(FI, A, B, C, D, 12, 6, 0x655b59c3);
    OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92);
    OP(FI, C, D, A, B, 10, 15, 0xffeff47d);
    OP(FI, B, C, D, A, 1, 21, 0x85845dd1);
    OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f);
    OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
    OP(FI, C, D, A, B, 6, 15, 0xa3014314);
    OP(FI, B, C, D, A, 13, 21, 0x4e0811a1);
    OP(FI, A, B, C, D, 4, 6, 0xf7537e82);
    OP(FI, D, A, B, C, 11, 10, 0xbd3af235);
    OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
    OP(FI, B, C, D, A, 9, 21, 0xeb86d391);
 
#undef OP
 
    /* Add the starting values of the context. */
    A += A_save;
    B += B_save;
    C += C_save;
    D += D_save;
  }
 
  /* Put checksum in context given as argument. */
  ctx->A = A;
  ctx->B = B;
  ctx->C = C;
  ctx->D = D;
 
#undef FF
#undef FG
#undef FH
#undef FI
#undef CYCLIC
}

static void *md5_read_ctx(const md5_ctx *ctx, void *resbuf)
{
  md5_uint32 *digest = static_cast<md5_uint32 *>(resbuf);
  digest[0] = SWAP(ctx->A);
  digest[1] = SWAP(ctx->B);
  digest[2] = SWAP(ctx->C);
  digest[3] = SWAP(ctx->D);
 
  return resbuf;
}
 
/* Top level public functions. */
 
int BLI_hash_md5_stream(FILE *stream, void *resblock)
{
#define BLOCKSIZE 4096 /* IMPORTANT: must be a multiple of 64. */
  md5_ctx ctx;
  md5_uint32 len[2];
  char buffer[BLOCKSIZE + 72];
  size_t pad, sum;
 
  /* Initialize the computation context. */
  md5_init_ctx(&ctx);
 
  len[0] = 0;
  len[1] = 0;
 
  /* Iterate over full file contents. */
  while (true) {
    /* We read the file in blocks of BLOCKSIZE bytes.
     * One call of the computation function processes the whole buffer
     * so that with the next round of the loop another block can be read.
     */
    size_t n;
    sum = 0;
 
    /* Read block. Take care for partial reads. */
    do {
      n = fread(buffer, 1, BLOCKSIZE - sum, stream);
      sum += n;
    } while (sum < BLOCKSIZE && n != 0);
 
    if (n == 0 && ferror(stream)) {
      return 1;
    }
 
    /* RFC 1321 specifies the possible length of the file up to 2^64 bits.
     * Here we only compute the number of bytes. Do a double word increment.
     */
    len[0] += sum;
    if (len[0] < sum) {
      ++len[1];
    }
 
    /* If end of file is reached, end the loop. */
    if (n == 0) {
      break;
    }
 
    /* Process buffer with BLOCKSIZE bytes. Note that `BLOCKSIZE % 64 == 0`. */
    md5_process_block(buffer, BLOCKSIZE, &ctx);
  }
 
  /* We can copy 64 bytes because the buffer is always big enough.
   * 'fillbuf' contains the needed bits. */
  memcpy(&buffer[sum], fillbuf, 64);
 
  /* Compute amount of padding bytes needed. Alignment is done to `(N + PAD) % 64 == 56`.
   * There is always at least one byte padded, i.e. if the alignment is correctly aligned,
   * 64 padding bytes are added.
   */
  pad = sum & 63;
  pad = pad >= 56 ? 64 + 56 - pad : 56 - pad;
 
  /* Put the 64-bit file length in *bits* at the end of the buffer. */
  *(md5_uint32 *)&buffer[sum + pad] = SWAP(len[0] << 3);
  *(md5_uint32 *)&buffer[sum + pad + 4] = SWAP((len[1] << 3) | (len[0] >> 29));
 
  /* Process last bytes. */
  md5_process_block(buffer, sum + pad + 8, &ctx);
 
  /* Construct result in desired memory. */
  md5_read_ctx(&ctx, resblock);
  return 0;
}
 
void *BLI_hash_md5_buffer(const char *buffer, size_t len, void *resblock)
{
  md5_ctx ctx;
  char restbuf[64 + 72];
  size_t blocks = len & ~63;
  size_t pad, rest;
 
  /* Initialize the computation context. */
  md5_init_ctx(&ctx);
 
  /* Process whole buffer but last len % 64 bytes. */
  md5_process_block(buffer, blocks, &ctx);
 
  /* REST bytes are not processed yet. */
  rest = len - blocks;
  /* Copy to own buffer. */
  memcpy(restbuf, &buffer[blocks], rest);
  /* Append needed fill bytes at end of buffer.
   * We can copy 64 bytes because the buffer is always big enough. */
  memcpy(&restbuf[rest], fillbuf, 64);
 
  /* PAD bytes are used for padding to correct alignment.
   * Note that always at least one byte is padded. */
  pad = rest >= 56 ? 64 + 56 - rest : 56 - rest;
 
  /* Put length of buffer in *bits* in last eight bytes. */
  *(md5_uint32 *)&restbuf[rest + pad] = (md5_uint32)SWAP(len << 3);
  *(md5_uint32 *)&restbuf[rest + pad + 4] = (md5_uint32)SWAP(len >> 29);
 
  /* Process last bytes. */
  md5_process_block(restbuf, rest + pad + 8, &ctx);
 
  /* Put result in desired memory area. */
  return md5_read_ctx(&ctx, resblock);
}
 
char *BLI_hash_md5_to_hexdigest(const void *resblock, char r_hex_digest[33])
{
  static const char hex_map[17] = "0123456789abcdef";
  const uchar *p;
  char *q;
  short len;
 
  for (q = r_hex_digest, p = (const uchar *)resblock, len = 0; len < 16; p++, len++) {
    const uchar c = *p;
    *q++ = hex_map[c >> 4];
    *q++ = hex_map[c & 15];
  }
  *q = '\0';
 
  return r_hex_digest;
}